Chamberlain Home Security System CWA2000 User Manual

®
Models CWA2000 & CWA2000C  
WIRELESS MOTION ALERT  
Overview  
The Wireless Motion Alert uses a Passive Infra-Red (PIR) Motion Sensor to detect movement of people and vehicles, while allowing  
small animals to pass through undetected. The Base Station is powered by the AC adapter and the 4 AA batteries supply power in case  
of a power outage.  
NOTE: The Base Station is intended for indoor use only.  
Carton Inventory  
Swivel Bushing  
Sun/Rain Shield  
Mounting Plate  
AC Adapter  
Base Station  
Passive Infra-Red (PIR)  
Motion Sensor  
Rubber Pads  
Operation & Features  
BASE STATION  
Batteries: If the AC adapter is not connected, the  
AA batteries in the Base Station should last up to one week.  
If the Base Station batteries are low, the Base Station will  
beep every 30 minutes. The AA batteries in the PIR Motion  
Sensor will last up to 2 years depending on use (lithium  
batteries are recommended for colder environments). If  
the PIR Motion Sensor batteries are low, the Base Station  
will beep every 30 minutes until the batteries are replaced.  
The PIR Motion Sensor will continue to operate with a  
low battery, however the light will not illuminate. For peak  
performance, inspect batteries annually and replace as  
needed.  
Antenna  
On/Off Button  
Volume  
Programming Additional PIR Motion Sensors: The Base  
Station can learn the code of up to 7 additional PIR Motion  
Sensors, responding with unique buzzes. To program  
additional PIR Motion Sensors see Step 4.  
To order additional PIR Motion Sensors call  
1-800-528-9131.  
On/Off: To turn the Base Station on and off, hold down the  
power button until you hear the on/off tone.  
Volume: The Base Station is equipped with adjustable  
volume controls. The lowest volume setting is the mute  
feature.  
Clear Memory: Press and hold the Learn Button on the Base  
Station until 3 beeps are heard.  
1
 
Troubleshooting  
The PIR Motion Sensor lights up, but the Base Station does  
not respond.  
The PIR Motion Sensor must be programmed to Base Station  
(See Step 4). Ensure Base Station is on and the volume is  
turned up.  
Base Station beeps every 30 minutes.  
The batteries in the Base Station or the PIR Motion Sensor(s)  
are low. Replace the 4 AA batteries. Check the PIR Motion  
Sensor(s), if the LED illuminates on all of the PIR Motion  
Sensors, change the batteries in the Base Station.  
PIR Motion Sensor is detecting motion only part of the time.  
Ensure the PIR Motion Sensor is set to the High Sensitivity  
setting (See Step 2). To detect cars, it is best to mount PIR  
Motion Sensor at height of car’s motor and have it between  
10-20 feet (3-6 m) from the road. Swivel sensor as needed.  
The Alert is not getting expected transmission range.  
Keep both antennas vertical and keep PIR Motion Sensor  
antenna away from trees and metal objects. Ensure Base Station  
is in clearest possible sight of the PIR Motion Sensor. The less  
objects between the devices, the longer the range.  
The Alert is giving false alarms.  
NOTE: The manufacturer is not responsible for any radio or  
TV interference caused by unauthorized modifications to this  
equipment. Changes or modifications not expressly approved  
by the manufacturer could void the user’s authority to operate  
the equipment.  
Check for moving tree branches or insects in sensor window.  
PIR Motion Sensor can also be triggered by light shining  
directly in sensor window, such as reflected sunlight, or motion  
in front of a light source.  
It is possible that condensation has built up on the sensor. Wipe  
condensation from PIR Motion Sensor with cotton swab. Let it  
sit inside for a few hours, open to the air, without the batteries  
and it should correct itself.  
Check Sensor Switches on PIR Motion Sensor. See Switch  
Settings.  
3
 
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this  
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the  
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.  
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired operation.  
FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:  
1-800-528-9131  
© 2010, The Chamberlain Group Inc.  
All Rights Reserved  
114A3896D  
 

Black Decker Coffeemaker DDCM200 User Manual
Blomberg Oven BEO 7043 User Manual
BMW GPS Receiver Navigation Portable Pro User Manual
Bosch Appliances Boiler 28CDI User Manual
Breville Coffeemaker BDC600XL User Manual
Briggs Stratton Automobile Parts 252700 User Manual
Brother Personal Computer BE 0901E AC PC User Manual
Cadco Food Warmer CBC SDC User Manual
Campbell Hausfeld Paint Sprayer AL1860 User Manual
Char Broil Charcoal Grill 463272509 User Manual