Casio Digital Camera QV 30 User Manual

Introduction  
Congratulations upon your selection of the QV-30 Liquid Crystal Digi-  
tal Camera. The QV-30 comes with its own built-in liquid crystal color  
monitor that let’s you instantly view the pictures you take.  
Liquid Crystal Digital Camera  
QV-30  
Owner’s Manual  
To get the most out of the QV-30, be sure to carefully read this  
manual and follow the instructions contained in it.  
2
Contents  
Using the Zoom Function .................................................... 41  
Using Auto Play .................................................................. 43  
Protecting Memory Pages .................................................. 46  
Hiding Protected Memory Pages ........................................ 49  
Precautions .......................................................... 5  
Unpacking............................................................. 9  
General Guide .................................................... 10  
Top and Display .................................................................. 10  
Lens .................................................................................... 10  
Bottom ................................................................................ 11  
Terminals ............................................................................ 11  
Deleting Memory Pages .................................... 50  
To delete a single memory page ........................................ 50  
To delete all unprotected memory pages ........................... 53  
Connecting to Other Devices............................ 56  
Power Supply ..................................................... 13  
To load batteries ................................................................. 13  
Using AC Power ................................................................. 18  
The camera terminals ......................................................... 56  
Using the Camera with a Connected Device ...... 57  
Troubleshooting................................................. 63  
Specifications..................................................... 69  
About the camera’s backlight… ....................... 70  
Recording Images .............................................. 20  
To record an image ............................................................. 20  
How to avoid hand movement… ......................................... 22  
Fluorescent Lighting ........................................................... 22  
Infrared Light....................................................................... 22  
Shooting images outdoors .................................................. 23  
Changing the Lens Orientation ........................................... 23  
NORMAL/MACRO Switch .................................................. 25  
Switching Between Lenses ................................................. 25  
Exposure Adjustment .......................................................... 26  
Changing the Aperture Setting ........................................... 27  
Record Mode Displays ........................................................ 28  
Using the Self-Timer ........................................................... 31  
• CASIO COMPUTER CO., LTD. assumes no responsibility for any  
damage or loss resulting from the use of this manual.  
• CASIO COMPUTER CO., LTD. assumes no responsibility for any  
loss or claims by third parties which may arise through the use of  
the QV-30.  
• CASIO COMPUTER CO., LTD. assumes no responsibility for any  
damage or loss caused by deletion of data as a result of malfunc-  
tion, repairs, or battery replacement. Be sure to back up all impor-  
tant data on other media to protect against its loss.  
Playing Back Images ......................................... 33  
Displaying Images on the Camera’s LCD ........................... 33  
Displaying Images on a TV Screen .................................... 35  
Displaying the Memory Page Number ................................ 36  
Producing a Multi-Page Display .......................................... 37  
3
4
 
Unpacking  
General Guide  
Check to make sure that all of the items shown below are included  
with your camera. If something is missing, contact your dealer as  
soon as possible.  
The following illustrations show the names of each component, but-  
ton and switch on the camera.  
Top and Display  
/PROTECT  
DISP (Display) button  
MODE button  
(Timer/Protect)  
button  
DEL (Delete) button  
Shutter button  
ZOOM button  
Soft case  
Aperture switch  
Camera  
[+] (Forward)  
button  
Alkaline batteries (AA-size × 4)  
NORMAL/MACRO  
switch  
[–] (Reverse)  
button  
LCD  
POWER switch  
Cleaning Cloth  
Function switch  
Manual  
Lens  
TELE(telephoto)/  
WIDE(Wide-angle) switch  
Wrist Strap  
Special video cable  
Lens  
9
10  
General Guide  
Getting Acquainted  
Connecting the Wrist Strap  
Bottom  
Pass the wrist strap through the hole on  
the side of the camera as shown in the  
illustration.  
2
Tripod  
hole  
Battery  
compartment  
lock  
Battery compartment cover  
BRIGHT (brightness) control  
1
• BRIGHT control adjusts the brightness of the image on the LCD.  
The brightness is set at the factory to the optimum setting, and nor-  
mally does not need adjustment.  
Using the Cleaning Cloth  
Terminals  
Use the cleaning cloth to wipe finger-  
prints and smudges from the LCD and  
lens.  
Terminal panel cover  
VIDEO OUT terminal  
• Be sure to avoid applying too much  
pressure when wiping the LCD. Too  
much pressure can cause permanent  
discoloration, abnormal images, and  
cracks.  
DIGITAL  
terminal  
AC Power terminal  
Using the Soft Case  
Opening the Terminal Panel Cover  
Keep the camera in its soft case to pro-  
tect it when not in use.  
3
1
2
Important!  
Make sure that the terminal panel cover is slid fully away as shown in  
step 2 above before trying to raise it. Forcing the cover up can seri-  
ously damage it.  
11  
12  
 
Power Supply  
Getting Acquainted  
The camera features a two-way power supply that lets you use either  
batteries (AA-size Alkaline) or household AC current.  
3. Close the battery compartment cover.  
A
To load batteries  
Be sure that camera power is turned off whenever loading or replac-  
ing batteries.  
1. Slide the battery compartment lock on the bottom of the  
camera in the direction indicated by arrow 1, and swing  
open the battery compartment cover as indicated by arrow  
2.  
Press down on the battery compartment cover at the point  
marked A in the above illustration until the cover locks into  
place with a click.  
Battery Handling Precautions  
Incorrect use or handling of batteries can cause them to leak or burst  
and seriously damage your camera. Be sure to note the following  
important precautions to avoid problems with batteries.  
2. Insert four batteries.  
• Use only LR6 (AM-3) type alkaline  
dry cell batteries with this camera.  
Never mix old batteries with new  
ones. Failure to do so can result in  
bursting or leaking of batteries, creat-  
ing the danger of fire or personal in-  
jury.  
Caution  
• Always make sure that the positive +  
and negative - ends of the batteries  
are facing correctly, as noted by the  
markings on the camera itself. Im-  
proper loading of batteries can result  
in bursting or leaking of batteries, cre-  
ating the danger of personal injury or  
soiling of objects nearby.  
Be sure to use only AA-size Alkaline batteries. Never use  
manganese batteries (see precautions on the next page).  
Make sure that the positive + and negative - ends of the  
batteries are facing correctly.  
13  
14  
Power Supply  
Getting Acquainted  
• Remove batteries from the camera if you do not plan to use it for  
more than two weeks.  
Low Battery Indicator  
A low battery indicator (  
) appears on the LCD whenever remain-  
• Never recharge batteries, never allow direct connection between  
two ends of a battery, and never try to take batteries apart.  
ing battery power drops below a certain level.  
• Do not expose batteries to direct heat or dispose of them by burn-  
ing. Doing so can create the danger of explosion.  
• Never mix batteries of different types.  
• Dead batteries are susceptible to leakage, which can cause serious  
damage to your camera. Remove batteries from the camera as  
soon as you notice they are dead.  
• The batteries that power this camera normally become warm when  
they lose power. This does not indicate malfunction.  
When this indicator appears, replace all four batteries with a fresh set  
of new ones. Once the low battery indicator appears, you can expect  
only about 10 more minutes of operation before total power failure.  
Standard Battery Life  
Flash Memory  
The following shows standard battery life of batteries when the cam-  
era is used without interruption under normal temperatures. Lower  
temperatures can cause shortening of the standard battery life.  
The camera features flash memory for storage of images. Flash  
memory does not require electrical power to store data, so image  
data is retained in memory even when you turn camera power off. If  
batteries go dead, simply load a set of new batteries or connect the  
AC adaptor and you will be able to view images in camera memory.  
Battery type : LR6 (AM-3) alkaline dry cell  
Battery Life : Approximately 2 hours  
Approximately 96 images  
(consecutive recording, one image per minute)  
15  
16  
 
Power Supply  
Getting Acquainted  
Auto Power Off  
Using AC Power  
Power automatically turns off whenever you do not perform any cam-  
era operation for a period of time. Power turns off after about two  
minutes in the Record Mode or after about five minutes in the Play-  
back Mode.  
To power the camera from standard AC power, use the optional AC  
adaptor (AD-C60).  
AC power terminal  
AC adaptor  
• To restore power, simply slide the POWER switch to the right as  
you normally do.  
AC outlet  
AC Adaptor precautions  
• Never use an electrical outlet whose  
voltage is outside the rating marked  
on the camera. Doing so can create  
the danger of fire or electrical shock.  
Use only the optional AC adaptor  
Important!  
The Auto Power Off function does not operate under the following  
conditions.  
• During Auto Play (page 43)  
specified for this camera.  
• When operations are being performed on a computer connected to  
the camera via the camera’s DIGITAL terminal.  
Caution  
• Should the cord of the AC adaptor  
become damaged (exposed internal  
wiring or shorts), request a replace-  
ment from an authorized CASIO ser-  
vice provider. A damaged AC adap-  
tor cord creates the danger of fire or  
electrical shock.  
17  
18  
Recording Images  
Power Supply  
• Always be sure to use the AD-C60  
AC adaptor only. Using any other AC  
adaptor can cause damage to the  
camera not covered by the warranty.  
The following procedure provides the basic steps for recording an  
image.  
To record an image  
• When unplugging the AC adaptor  
from the wall socket, be sure to  
grasp the adaptor (not the cord).  
REC  
1. Enter the Record Mode.  
Caution  
Slide the function switch to the  
REC position.  
• Avoid an undue bending, pulling,  
and twisting of the AC adaptor's  
cord, and never try to lengthen the  
cord by splicing it with other wire.  
PLAY  
2. Turn on the camera.  
Slide the POWER switch in the di-  
rection indicated by the arrow.  
The POWER switch automatically  
slides back to its original position  
when you release it.  
• Be sure to switch power off before connecting or disconnecting the  
adaptor.  
• Always turn camera power off before disconnecting the AC adaptor,  
even if the camera has batteries installed. If you don't, the camera  
will turn off automatically when you disconnect the AC adaptor.  
Even so, you run the risk of damaging the camera whenever you  
disconnect the AC adaptor without first turning power off.  
When power comes on, the image of the object that is in  
front of the camera’s lens appears on the LCD.  
You can perform steps 1 and 2 in either order (1 then 2, or 2  
then 1).  
• The AC adaptor may become warm to the touch after extended pe-  
riods of use. This is normal and is not cause for alarm.  
3. Set the NORMAL/MACRO switch to the NORMAL position.  
For close-ups, set the NORMAL/  
MACRO switch to MACRO. See  
page 25 for details on using this  
switch.  
• After use turn off the power switch of the camera and unplug adap-  
tor from the AC outlet.  
MACRO  
NORMAL  
Note  
• The camera is designed to refresh the image on the LCD about  
seven times per second. Because of this, you may experience a  
feeling of jerkiness in the changing image if you move the camera  
quickly. This is normal and does not indicate malfunction.  
19  
20  
 
Recording Images  
Operation  
How to avoid hand movement…  
4. Record the image.  
Any hand movement when you press the shutter button can causes  
blurring of the recorded image. Note the following points on avoiding  
hand movement.  
REC  
Compose the image you want to  
record while viewing it on the  
LCD.  
MACRO  
NORMAL  
PLAY  
• Make sure there is no excessive movement of the image of the ob-  
ject on the LCD.  
It is best to look at the LCD di-  
rectly, and not from an angle.  
• Use a tripod whenever possible when recording images in dim light-  
ing. The camera automatically adjusts shutter speed in accordance  
with the brightness of the object whose image is being recorded.  
Shutter speed is quite slow for dimly lit objects, increasing the pos-  
sibility of blurring caused by hand movement.  
Take care that your finger is not  
blocking the lens.  
Should the lens become dirty, use  
the cloth that comes with the cam-  
era to clean it off.  
When the image is situated on the  
LCD as you want it, press the  
shutter button.  
Fluorescent Lighting  
Fluorescent lighting actually flickers at a frequency that cannot be  
detected by the human eye. When using the camera indoors under  
such lighting, you may experience some brightness or color problems  
with recorded images. The actual extent of the problems depends on  
what cycle of the fluorescent light’s flicker is occurring when the  
camera’s shutter actually releases. For best results, use a commer-  
cially available video lights.  
Press the shutter button lightly to avoid moving the camera.  
See page 22 for information on how to avoid hand move-  
ment.  
The message “WAIT” appears on the LCD for about six sec-  
onds along with the image that was recorded when you  
pressed the shutter button. You can use the camera to take  
the next picture after the “WAIT” message disappears.  
Here you could change the function switch to the PLAY posi-  
tion and view the image you just recorded.  
Infrared Light  
Infrared light generated by a flash or other source can create image  
color problems, such as red areas being recorded as green. Such  
color problems will show up in the LCD while you are composing the  
image.  
Caution  
• Never open the battery compartment cover, disconnect the  
AC adaptor from the camera or unplug it from the wall  
socket while the “WAIT” message is on the LCD. Doing so  
will not only make storage of the current image impossible, it  
can also corrupt other image data already stored in camera  
memory.  
21  
22  
Recording Images  
Operation  
• Any images recorded while the lens body is rotated so the lens is  
pointed from the back of the camera are stored as mirror images of  
the image that appears in the LCD before the shutter button is  
pressed.  
Shooting Images Outdoors  
Strong direct or reflected sunlight can cause recorded images to take  
on a greenish tinge. This is due to the characteristics of the camera’s  
optical pickup and it does not indicate malfunction of the camera. One  
way you can try to minimize this problem is to set the aperture to []  
(F8).  
Changing the Lens Orientation  
The lens of the camera is built into a lens body that is designed to  
rotate. This means you can change the angle of the lens without mov-  
ing the rest of the camera.  
A
A
B
LCD when shutter button is  
pressed (in the Record Mode)  
LCD when image is played  
back from camera memory  
B
Rotates up to 90° towards the front  
Important!  
• Do not apply excessive force when rotating the lens body. Doing so  
can cause serious damage to the lens.  
• Do not carry the camera or move it around while holding onto only  
the lens body.  
• Return the lens body to its normal position (with the lens pointing  
from the front of the camera) before storing the camera.  
Rotates up to 180° towards the back  
23  
24  
 
Recording Images  
Operation  
NORMAL/MACRO Switch  
Exposure Adjustment  
The NORMAL/MACRO switch tells the  
camera how much distance there will be  
between the lens and the object whose im-  
age you are recording. The following table  
describes the conditions covered by each  
switch setting.  
This camera features an automatic exposure (AE) function that auto-  
matically changes the shutter speed in accordance with lighting. In  
addition, you can also manually adjust the exposure to compensate  
for backlighting, indirect indoor lighting, dark backgrounds, and other  
special conditions.  
MACRO  
NORMAL  
To manually adjust the exposure  
REC  
1. Enter the Record Mode.  
Switching Between Lenses  
Set the function switch to the REC  
position.  
PLAY  
This camera gives you a choice between  
telephoto (TELE) and wide-angle (WIDE)  
lenses. The following shows the optimum  
distances at which you should use each of  
these lenses.  
2. Use the [+] and [–] buttons to manually adjust the exposure.  
TELE  
WIDE  
Pressing [+] makes the image on  
the LCD brighter. Use it to adjust  
for dim indoor lighting and back-  
lighting.  
Distances  
Pressing [–] makes the image on  
the LCD darker. Use it to adjust  
for bright sunlight.  
Lens  
Aperture  
Normal  
Macro  
(MACRO)  
(NORMAL)  
Wide Angle (WIDE) F2.8()  
50cm ~ ∞  
(1.6' ~ )  
10cm ~ 13cm  
(3.9" ~ 5.1")  
+
f = 4.0mm  
F8 ()  
24cm ~ ∞  
(9.4" ~ )  
8cm ~ 19cm  
(3.1" ~ 7.5")  
+
+
Telephoto (TELE)  
f = 9.0mm  
F2.8()  
F8 ()  
250cm ~ ∞  
(8.2' ~ )  
50cm ~ 65cm  
(1.6' ~ 2.1')  
120cm ~ ∞  
(3.9' ~ )  
40cm ~ 95cm  
(1.3' ~ 3.1')  
* See page 27 for information on changing the aperture.  
3. After adjusting the exposure, press the shutter button to  
record the image.  
25  
26  
Recording Images  
Operation  
Notes  
Record Mode Displays  
• Exposure adjustment is generally expressed in terms of an expo-  
sure adjustment value. The exposure adjustment value is always  
set to zero whenever you turn on the camera.  
The following provides details on the images, indicators and mes-  
sages that appear on the LCD in the Record Mode.  
Image Display  
• The exposure adjustment value is changed by 0.25 with each press  
of [+] or [–]. The range of the value is -2 to +2.  
An image of the object that is picked up by the camera’s lens appears  
on the LCD. The camera is designed to refresh the image on the LCD  
about seven times per second. Because of this, you may experience  
a feeling of jerkiness in the changing image if you move the camera  
quickly. This is normal and does not indicate malfunction.  
• The exposure adjustment value automatically reverts to zero when-  
ever the shutter button is pressed. You can manually reset the ex-  
posure adjustment value by using [+] and [–] to change the value  
+
back to zero, which is indicated when the  
from the monitor.  
indicator disappears  
Note  
• The LCD image that appears in the Playback Mode is more detailed  
than the image produced in the Record Mode. Because of this, you  
should consider the Record Mode image to be a reasonable fac-  
simile of the image that is actually stored in memory.  
Changing the Aperture Setting  
There are two aperture settings you can use to match lighting condi-  
tions. Use the aperture switch to change the aperture setting.  
Displaying the Image Number  
The image number is a value that indicates the number of the next  
image that will be recorded. Up to 96 images can be stored in camera  
memory.  
• Use the [] (F8) setting to decrease expo-  
sure. This setting works best outdoors.  
• Use the [] (F2.8) setting to increase ex-  
MACRO  
NORMAL  
posure. This setting works best indoor and  
with back lit images.  
REC  
1. Enter the Record Mode.  
Set the function switch to the REC  
position.  
PLAY  
Note  
2. Press the DISP button.  
• Also see page 29 for information about exposure warning indica-  
tors.  
27  
28  
 
Recording Images  
Operation  
The image number appears in  
the upper right corner of the  
LCD. It indicates the number of  
the next image that will be re-  
corded. The number 21, for ex-  
ample, indicates that there are  
20 images in memory, and the  
next image will be number 21.  
Use the procedure described on page 27 to change the aperture or  
change the lighting of the image so the indicator disappears from the  
LCD.  
Important!  
• The exposure warning indicators also appear when lighting is out-  
side the range of the camera. In such a case, changing the aperture  
will not clear the indicator from the LCD.  
To clear the image number from the LCD, press the DISP  
button again.  
• The manual exposure adjustment procedure (page 26) cannot be  
used when an exposure warning indicator is on the LCD. Clear the  
warning indicator by changing the aperture switch setting.  
Note  
• Pressing the [+] or [–] button to adjust exposure while an exposure  
warning indicator is on the LCD clears the warning indicator and  
causes a positive [+] or negative [–] exposure correction (EV shift)  
indicator to appear.  
• Note that turning display of the image number on and off in the  
Record Mode also affects the display of the memory page number  
in the Playback Mode (page 36), and the zoom area indicator used  
in the zoom operation (page 41). If you turn display of the image  
number off in the Record Mode, for example, the memory page  
number will not be shown in the Playback Mode.  
Low Battery Indicator  
The low battery indicator (  
) appears on the LCD whenever re-  
maining battery power drops below a certain level.  
Exposure Warning Indicators  
Exposure warning indicators appear on the LCD whenever the light  
being picked up by the lens would result in under exposure or over  
exposure of an image.  
When this indicator appears, replace all four batteries with a fresh set  
of new ones. Once the low battery indicator appears, you can expect  
only about 10 more minutes of operation before total power failure.  
• See page 13 for details on how to replace batteries.  
Over exposure  
Under exposure  
29  
30  
Recording Images  
Operation  
To cancel on ongoing Self-Timer  
operation, press the /PRO-  
TECT button or shutter button.  
Memory Full Message  
The message “MEMORY FULL” appears  
on the LCD whenever you press the shut-  
ter button while camera memory is full. If  
you want to record more images, you must  
first delete some of the images already  
stored in camera memory. See page 50 for  
details on how to delete images.  
Note  
• If you use the Self-Timer with the lens body rotate 180° (page 23),  
you can view the countdown on the LCD while waiting for the shut-  
ter to release.  
Important!  
Using the Self-Timer  
• If battery power is low, camera power may turn off while a count-  
down is in progress. If this happens, replace the batteries with new  
ones.  
With the Self-Timer, the shutter is released 10 seconds after you  
press the /PROTECT button.  
REC  
1. Enter the Record Mode.  
Set the function switch to the REC  
position.  
PLAY  
2. Start the Self-Timer operation.  
Place the camera securely on a tripod, desk or other stable  
surface, with the image to be recorded in the LCD.  
After composing the image, press  
the  
/PROTECT button.  
A 10-second countdown starts on  
the LCD. The shutter will release  
automatically when the end of the  
countdown is reached.  
31  
32  
 
Playing Back Images  
Operation  
This section describes how to recall and view images stored in cam-  
era memory.  
3. Scroll through the memory pages until the image you want  
to view is displayed.  
Press [+] to display the next memory page or [–] to display  
the previous memory page.  
Displaying Images on the Camera’s LCD  
The camera can store up to 96 images in memory. Images are se-  
quentially numbered from 1 through 96. Think of camera memory like  
a 96-page album of the images you record.  
+
+
The following procedure describes how to display images on the  
camera’s built-in LCD.  
1. Enter the Playback Mode.  
REC  
Slide the function switch to the  
PLAY position.  
Notes  
PLAY  
• If you set the function switch to PLAY after recording an image, that  
image appears on the LCD first.  
2. Turn on the camera.  
Slide the POWER switch in the di-  
• The message “MEMORY EMPTY” appears on the LCD if there are  
no images stored in memory when you enter the Playback Mode.  
rection indicated by the arrow.  
The POWER switch automatically  
slides back to its original position  
when you release it.  
When power comes on, the page  
that was displayed when you last  
turned power off appears on the  
LCD.  
You can perform steps 1 and 2 in  
either order (1 then 2, or 2 then 1).  
33  
34  
Playing Back Images  
Operation  
Displaying Images on a TV Screen  
Displaying the Memory Page Number  
Use the special video cable that comes with the camera to connect it  
to a television as illustrated below, and you can then view the images  
stored in camera memory on the TV’s screen.  
The memory page number is a value in the upper right corner of the  
LCD that indicates the number of the currently shown memory page.  
REC  
1. Enter the Playback Mode.  
Important!  
Set the function switch to the  
PLAY position.  
• The camera can be connected only to a TV that is equipped with a  
VIDEO IN terminal.  
PLAY  
• Make sure that the power of both the camera and the TV are turned  
off when making connections.  
2. Press the DISP button.  
Accessory video cable  
VIDEO OUT terminal  
TV  
The memory page number ap-  
pears in the upper right corner of  
the LCD.  
IN P U T  
L
R
V ID E O  
A U D IO  
To clear the memory page num-  
ber from the LCD, press the DISP  
button again.  
VIDEO IN terminal  
After connecting the camera and TV, set the  
channel of the TV to the channel used for  
video input.  
Notes  
• The letter “P” next to the memory page number indicates that page  
is “protected” and cannot be deleted. See page 46 for details about  
protecting memory pages.  
After connecting the camera and TV, use the same procedures as  
those described under “Displaying Images on the Camera’s LCD” on  
page 33.  
• Note that turning display of the memory page number on and off in  
the Playback Mode also affects the display of the image number in  
the Record Mode (page 28), and the zoom area indicator used in  
the zoom operation (page 41).  
Important!  
• Note that only images already stored in camera memory can be  
viewed on the TV screen. If you change to the camera’s Record  
Mode, the image picked up by the camera’s lens will not appear on  
the TV screen.  
35  
36  
 
Playing Back Images  
Operation  
Producing a Multi-Page Display  
3. Scroll through the pages on the display.  
Four or nine memory pages can be displayed at the same time. This  
feature can be used to display multiple memory pages on the  
camera’s built-in LCD, or on the screen of a connected TV.  
Use [+] (forward) and [–] (back) to scroll through the memory  
pages. Pages are scrolled one, four, or nine at a time, de-  
pending on the display format you are using.  
1. Enter the Playback Mode and turn on the camera.  
REC  
2. Switch to multi-page display.  
+
+
1
3
2
4
5
7
6
8
9
10  
Press the MODE button to  
change between the different dis-  
play formats.  
11  
PLAY  
Each press of MODE changes the  
display format in the following se-  
quence.  
Unused pages are colored gray.  
Note  
You cannot use the multi-page  
display while protected memory  
pages are hidden (page 49).  
• The brightness of the images on a multi-page display may differ  
slightly from the brightness when a single image is shown. This is  
because the camera automatically uses the brightness setting for  
the brightest image contained in the multi-page display for all of the  
images.  
*
The memory page that is shown on the screen when you  
change to the 4-page or 9-page format is in the first (upper  
left) position in the multi-page display.  
37  
38  
Playing Back Images  
Operation  
Selecting a Memory Page in a Multi-Page Display  
3. Move the white line to the memory page that you want to  
select.  
You can use the following procedure to select one of the memory  
pages in a multi-page display. Then when you return to the 1-page  
display, the memory page you selected will be the one displayed. The  
following procedure uses the 4-page display as an example, but you  
can use the same procedure with the 9-page display.  
Press [+] to move the line to the  
right or [–] to move it to the left. In  
this example, press [+] three  
times or [–] once.  
X 3  
+
1. In the Playback Mode, press the MODE button.  
This changes to the 4-page dis-  
play.  
4. Press the ZOOM button.  
The image in the selected  
memory page appears as a 1-  
page display.  
In this example, we will select this page.  
2. Press the DISP button.  
This causes a white line to appear  
under the first (upper left) page.  
This white line indicates the  
memory page that is currently se-  
lected.  
If you do not perform any opera-  
tion for about 10 seconds, the  
white line disappears from the dis-  
play.  
39  
40  
 
Playing Back Images  
Operation  
Changing the Location of the Zoom Area  
Using the Zoom Function  
This function lets you select a specific part of a stored image and  
enlarge it to twice its normal size.  
+
+
+
+
+
+
+
+
+
1. Display an image.  
2. Press the ZOOM button to zoom in on the center of the im-  
age.  
The center of the image is enlarged to twice its normal size.  
• Pressing [–] moves the zoom area in the opposite direction.  
Notes  
• If the page number is displayed in the upper right corner of the  
screen when you perform a zoom operation, the number is replaced  
by a zoom area indicator. This indicator shows you what part of the  
image is currently enlarged on the display. You can turn the zoom  
area indicator on and off by pressing the DISP button.  
3. Change the position of the zoom area.  
You can use [+] and [–] to change the position of the zoom  
area in the sequence shown on page 42.  
4. Press the ZOOM button again to return the image to its  
original size.  
Zoom area indicator  
• Note that turning display of the zoom area indicator on and off dur-  
ing a zoom operation also affects the display of the image number  
in the Record Mode (page 28), and the memory page number in the  
Playback Mode (page 36).  
41  
42  
Playing Back Images  
Operation  
Using Auto Play  
Auto play lets you automatically scroll through the camera’s memory  
pages quickly and easily. You can specify the speed of the scroll.  
3 seconds  
3 seconds  
Important!  
• The camera’s Auto Power Off function (page 17) does not function  
while an auto play operation is in progress. If you forget to turn the  
camera off, there is the danger that auto play will continue until bat-  
teries are dead. To avoid this, make sure that you stop the auto play  
operation and turn the camera off when you finish viewing.  
Auto play continues to loop through the memory pages. This  
means that when it reaches the last page, it starts again  
from the first page.  
3. Press the shutter button to stop the auto play operation.  
Pressing any button except the  
MODE button stops the auto play  
operation.  
To start the auto play operation  
1. Enter the Playback Mode and turn on the camera.  
2. Start the auto play operation.  
Note that the buttons of the cam-  
era do not operate while a page  
change operation is in progress.  
Make sure that an image is shown  
on the display when you press a  
button to stop the auto play opera-  
tion.  
Hold down the [+] and [–] buttons until the message “AUTO  
PLAY START” appears.  
There must be at least two images (two pages) recorded in  
memory to use the auto play operation. Otherwise, the  
“AUTO PLAY START” message will not appear on the dis-  
play.  
To set auto play speed  
Use the following procedure to specify how long each image remains  
on the display, within the range of 3 to 30 seconds.  
After about one second, this message disappears and the  
auto play operation starts.  
43  
44  
 
Playing Back Images  
Operation  
Protecting Memory Pages  
You can protect specific memory pages to ensure that they are not  
accidently deleted.  
1. Perform steps 1 and 2 under “To start the auto play opera-  
tion” on page 43 to start auto play.  
2. Press MODE to enter the Auto Play Setting Mode.  
To protect a page  
Be sure to press MODE while an image is stopped on the  
monitor, and not while images are changing.  
1. Enter the Playback Mode and turn on the camera.  
Slide the function switch to the PLAY position.  
Slide the POWER switch in the direction indicated by the  
arrow.  
Speed (number of  
seconds each  
image is displayed)  
If the page number is not shown in  
the upper right of the page, press  
DISP.  
3. Use [+] (increase) and [–] (decrease) to change the current  
speed setting.  
Page number  
You can set the speed within a range of 3 to 30 seconds, in  
three-second increments.  
4. To start auto play using your newly set speed setting,  
press the shutter button.  
To exit the auto play setting mode at any time, change the  
function switch position to REC and then back to PLAY, or  
turn power off. Either of these methods cancels any settings  
you made and returns to the settings in effect when you en-  
tered the Auto Play Setting Mode.  
2. Scroll through the memory pages until the one you want to  
protect is displayed.  
Press [+] to display the next  
memory page or [–] to display the  
previous memory page.  
You can use auto play in combination with the multi-page  
display (page 37). First change to the multi-page format, and  
then perform the auto play operation (page 43).  
You cannot protect or unprotect  
memory pages while protected  
memory pages are hidden (page  
49).  
You cannot use auto play in combination with the multi-page  
display while protected pages are hidden.  
45  
46  
Playing Back Images  
Operation  
To unprotect a page  
1. Enter the Playback Mode and turn on the camera.  
2. Scroll through the memory pages until the one you want to  
unprotect is displayed.  
3. Protect the page.  
Press the  
/PROTECT button  
to protect the page.  
The letter “P” appears to the right  
of the page number to indicate  
that page is protected.  
3. Press the  
/PROTECT button.  
Protect indicator  
The letter “P” disappears, indicating that page is no longer  
protected.  
Note  
• If the page number is not displayed when you press the  
/PRO-  
TECT button, the page number along the protect indicator appears  
about a second after you press the button.  
Note  
• If the page number is not displayed when you press the  
/PRO-  
TECT button, the page number appears about a second after you  
press the button.  
47  
48  
 
Deleting Memory Pages  
Playing Back Images  
Use the procedures described in this section to delete memory  
pages. You can delete individual pages, or all the pages currently  
stored in memory.  
Hiding Protected Memory Pages  
This function makes it possible for you to hide protected memory  
pages so their images do not appear on the monitor during playback.  
Warning!  
To hide protected memory pages  
The delete operation cannot be undone!  
While holding down the [+] button, turn on the camera.  
Before performing any of the procedures described in this section,  
make sure that you really do not need the images recorded on the  
memory pages you are deleting. Be especially careful when you are  
using the all delete operation.  
Important!  
• You cannot protect or unprotect pages (pages 46~48) while pro-  
tected pages are hidden.  
• You cannot display multiple images (page 37) while protected  
pages are hidden.  
To delete a single memory page  
• The following message appears on the monitor when you hide pro-  
tected memory pages and all pages currently in memory are pro-  
tected. It also appears if you delete all unprotected memory pages  
while protected memory pages are hidden.  
1. Enter the Playback Mode and turn on the camera.  
Slide the function switch to the PLAY position.  
Slide the POWER switch in the direction indicated by the  
arrow.  
2. Scroll through the memory pages until the one want to de-  
lete is displayed.  
Press [+] to display the next memory page or [–] to display  
the previous memory page.  
Remember that you cannot delete a protected page. If the  
page you want to delete is protected, use the procedure on  
page 48 to unprotect it before proceeding.  
To unhide protected memory pages  
While holding down the [–] button, turn on the camera.  
You cannot delete memory pages while using multi-page  
display (page 37), zoom function (page 41), or auto play  
(page 43).  
49  
50  
Deleting Memory Pages  
Operation  
To abort the delete operation without deleting anything,  
press DEL.  
3. Press DEL.  
DEL  
POWER  
ON/OFF  
6. To delete the page whose contents are shown, press the  
shutter button.  
* This screen clears  
automatically from  
the display if you do  
not perform any op-  
eration for about 30  
seconds.  
Pressing the shutter button de-  
letes the page you selected and  
displays the next page.  
One-page delete  
All page delete  
Exit this screen  
7. Repeat steps 5 and 6 as many times as you want to delete  
memory pages.  
4. Press the [+] button to specify deletion of a single page.  
After you are finished deleting pages, press DEL to exit the  
delete operation.  
If the page you selected in step 2  
is protected, the contents of the  
nearest unprotected page appear  
in the above screen.  
Note  
• Deleting a page causes the remaining pages to be renumbered.  
Blank pages are not left inserted between non-blank pages.  
* This screen clears  
automatically from  
the display if you do  
not perform any op-  
eration for about 30  
seconds.  
1
2
3
4
The contents of the  
memory page you  
displayed in step 2  
appear here.  
5. Make sure that you really want to delete the page that con-  
tains the contents shown on the display.  
1
2
3
You can use [+] and [–] to change the memory page. When  
you do, protected pages are skipped (not displayed).  
51  
52  
 
Deleting Memory Pages  
Operation  
Warning!  
To delete all unprotected memory pages  
The following operation deletes all unprotected memory pages and  
cannot be undone. Make sure that you do not need any of the images  
stored in memory before performing this operation.  
1. Enter the Playback Mode and turn on the camera.  
DEL  
2. Press DEL.  
POWER  
ON/OFF  
4. To delete all unprotected pages, press the shutter button.  
If there were no protected pages in memory, the message  
“MEMORY EMPTY” appears on the display after all memory  
pages are deleted.  
* This screen clears  
automatically from  
the display if you do  
not perform any op-  
eration for about 30  
seconds.  
One-page delete  
All page delete  
Exit this screen  
3. Press the [–] button to specify deletion of all unprotected  
pages.  
If there were protected pages in memory, they are the only  
pages that remain after the delete operation is complete.  
To abort the delete operation  
without deleting anything, press  
DEL.  
* This screen clears  
automatically from  
the display if you do  
not perform any op-  
eration for about 30  
seconds.  
53  
54  
ConnectingtoOther Devices  
The camera terminals  
The following describes which the camera terminal you should use  
for each type of connection.  
Deleting Memory Pages  
The following message appears on the monitor whenever  
you delete all unprotected memory pages while protected  
memory pages are hidden (page 49).  
VIDEO OUT – Use this terminal when connecting to the VIDEO IN  
terminal of a TV, video tape deck, video printer, or  
other similar devices. Use the special video cable  
that comes with the camera for such connections.  
IN P U T  
VIDEO OUT  
L
R
V ID E O  
terminal  
A U D IO  
Special video  
cable that comes  
with camera  
VIDEO IN  
terminal of other  
device  
DIGITAL – Use this terminal to connect to a personal computer (re-  
quires optional Connection Kit) or another CASIO Digital  
Camera. Connect to another digital camera as illustrated  
below.  
DIGITAL terminal  
DIGITAL terminal*  
Connecting  
cable*  
* The type of connecting cable you should use depends on the type  
and shape of the terminals equipped on the digital camera you are  
connecting to. See pages 59 through 61 for details.  
55  
56  
 
Using the Camera with a Connected Device  
Connecting to Other Devices  
The following section provides specific information on how you can  
use the camera after connecting to various types of devices. In each  
case, the camera terminal you should connect to is indicated in the  
• Page numbers (page 28) are also recorded on the video tape if they  
are turned on. Be sure to turn off display of page numbers if you do  
not want them in the taped images.  
DIGITAL  
VIDEO  
title as  
and  
.
• If the low battery indicator (page 30) is displayed while you are re-  
cording to video tape, it will also be recorded with the image. If this  
happens, either replace batteries or use the AC adaptor.  
Important!  
• Make sure that the power of all devices is turned off before connect-  
ing them.  
VIDEO  
Video Printer  
• You should also check the owner’s manuals of the device you are  
connecting to the camera for precautions and other information.  
You can use Video Printer to print copies of images in camera  
memory.  
VIDEO  
Television  
To print camera images on a Video Printer  
• See page 35 of this manual for details about connecting to a televi-  
sion and displaying images from camera memory on a TV screen.  
1. Use the special video cable that comes with the camera to connect  
to the VIDEO IN terminal of the video printer.  
2. Set up the video printer to print images input through its VIDEO IN  
terminal.  
VIDEO  
Video Tape Deck  
• Consult the owner’s guide that comes with the video printer for de-  
tails about how to set up for printing.  
You can use the video tape deck to record images from the camera.  
3. Enter the camera Playback Mode and display the image you want  
to print.  
To record camera images on video tape  
1. Use the special video cable that comes with the camera to connect  
to the VIDEO IN terminal of the video tape deck.  
4. Start the video printer’s print operation.  
• Page numbers (page 28) are also included on the print if they are  
turned on. Be sure to turn off display of page numbers if you do not  
want them in the print.  
2. Set up the video tape deck to record images input through its  
VIDEO IN terminal.  
• Consult the owner’s guide that comes with the tape deck for details  
about how to set up for recording.  
• If the low battery indicator (page 30) is displayed while you are print-  
ing, it will also be printed with the image. If this happens, either  
replace batteries or use the AC adaptor.  
3. Enter the camera Playback Mode and start the video deck record  
operation.  
• It is probably best to use auto play when recording camera images  
to video tape, because it changes pages automatically at a preset  
speed.  
57  
58  
Using the Camera with a Connected Device  
Connecting to Other Devices  
4. Use the [+] and [–] buttons to move the pointer to the send icon.  
Connecting to another CASIO Digital Camera  
DIGITAL  
5. After you make the setting you want, press the shutter button  
again.  
You can connect the camera to another CASIO digital camera and  
exchange image data between them. Connect the DIGITAL terminals  
of the two cameras using the optionally available SB-62 connecting  
cable.  
• Pressing the shutter button sends the selected image to the other  
camera.  
• You can send only one image at a time. To send more images,  
repeat steps 2 through 5.  
To connect the two cameras  
To receive data to this camera from another camera  
1. Turn both cameras off.  
1. Set the function switches of both cameras to PLAY.  
2. Connect the two cameras by plugging the optional SB-62 connec-  
tion cable into their DIGITAL terminals.  
2. Use the [+] and [–] buttons of other camera to find the image you  
want to receive.  
3. Turn both cameras on.  
• You cannot receive images between two cameras while either of  
their function switches is set to REC.  
• You will not be able to send image data to a camera whose memory  
is already full (contains 96 images).  
• You cannot receive multi-page display or zoomed images.  
To send data from this camera to another camera  
• If you try to receive a multi-page display or zoomed images, other  
camera’s monitor automatically changes to normal display of page 1.  
1. Set the function switches of both cameras to PLAY.  
2. Use the [+] and [–] buttons of this camera to find the image you  
want to send.  
3. Press the shutter button of this camera.  
• You cannot send images between two cameras while either of their  
function switches is set to REC.  
• You cannot send images while using the multi-page display or  
zoom function.  
Send icon  
Receive icon  
3. Press the shutter button of this camera.  
Return to previous  
display  
Send icon  
Receive icon  
Return to previous  
display  
59  
60  
 
Using the Camera with a Connected Device  
Connecting to Other Devices  
4. Use the [+] and [–] buttons to move the pointer to the receive icon.  
VIDEO  
Computer (Video Capture)  
• As soon as you perform the above step, all of the buttons and con-  
trols on the other camera become disabled.  
You can use the special video cable that comes with the camera to  
connect directly to the VIDEO IN terminal of a personal computer  
equipped with video capture capabilities.  
5. After you make the setting you want, press the shutter button  
again.  
To transfer camera images to a personal computer (video  
capture)  
• Pressing the shutter button receives the selected image from the  
other camera.  
1. Use the special video cable that comes with the camera to connect  
to the VIDEO IN terminal of the computer.  
* You can receive only one image at a time. To send more images,  
repeat steps 2 through 5.  
2. Enter the camera Playback Mode and display the image you want  
to send.  
Important!  
3. Perform the required operation on the computer.  
Never disconnect the cable, turn power off, or change the function  
switch setting while a data communication operation is in progress.  
Doing so can damage the camera.  
• Consult the owner’s guide that comes with the computer or its video  
capture board for details about how to set up to capture images.  
Important!  
• With this configuration, you cannot send images from the personal  
computer to the camera.  
Connecting to a Computer using a Connection  
Kit  
Optionally available personal computer connection kits are available  
to allow transfer of digital data with a personal computer. Each kit  
includes special connecting cables, and software, and makes it pos-  
sible to send images from the camera to a personal computer and  
vice versa. Images are transferred as digital data, which minimizes  
loss of image quality.  
• The camera can be connected directly to a personal computer or  
video capture board that is equipped with a VIDEO IN terminal  
(RCA pin jack). It cannot be connected directly to an S-VIDEO ter-  
minal.  
For details on connecting to your computer and how to use the soft-  
ware, see the user documentation that comes with the connection kit.  
61  
62  
Troubleshooting  
Reference  
Symptom  
No power  
Probable Cause  
Action  
Sympton  
Probable Cause  
Action  
1. Batteries not loaded 1. Correctly load batter-  
Poor LCD image Incorrect NORMAL/ Use NORMAL for scen-  
correctly.  
2. Dead batteries  
ies (page 13).  
focus  
MACRO switch setting ery and group photos,  
and MACRO for close-  
2. Replace batteries with  
new ones (page 13).  
3. Use only recom-  
mended AC adaptor .  
ups (page 25).  
3. Wrong AC adaptor  
Poor color and Indoor fluorescent lighting Shoot under incandes-  
brightness when  
indoors  
cent or other non-fluores-  
cent lighting (page 22).  
Sudden power 1. Operation of Auto 1. Turn power back on.  
failure  
Power Off  
2. Low battery power  
Use of manganese  
batteries.  
2. Replace batteries with  
new ones (page 13).  
Replace manganese  
batteries with alkaline  
batteries.  
Recorded image Strong direct or reflected Change aperture setting  
has greenish sunlight  
tinge.  
to [] (F8). This condition  
is due to optical pickup  
characteristics and does  
not indicate camera mal-  
function.  
indicator Low battery power  
on LCD  
Replace batteries (page  
13).  
Color of re- 1. Reflection from sun- 1. Reorient the camera  
corded image is  
strange.  
light or light from an-  
other source  
so that light is not shin-  
ing directly into lens.  
No recording Function switch sets to Set function switch to  
when shutter PLAY.  
REC.  
b u t t o n  
pressed  
i s  
2. Difference between 2. This difference does  
Record Mode and  
Playback Mode char-  
acteristics.  
not indicate a problem  
or malfunction.  
Power failure Low battery power  
during self-timer  
Replace batteries (page  
13).  
operation  
No [+]/[–] button Button operation during Wait until an image is on  
operation during page change  
multi-page dis-  
play  
the LCD before perform-  
ing a button operation.  
indicator on Over exposure  
LCD  
Change aperture switch  
setting to [] (page 27).  
indicator on Under exposure  
LCD  
Change aperture switch  
setting to [] (page 27).  
Cannot start Only one image in Auto play can be used  
auto play opera- memory  
tion  
only when there are two  
or more images in cam-  
era memory.  
63  
64  
 
Troubleshooting  
Action  
Reference  
Sympton  
ALL DATA IS Protected memory pages Unhide protected memo-  
Sympton  
Probable Cause  
Probable Cause  
Action  
All pages do not Protected memory pages Unhide protected memo-  
PROTECTED! are hidden.  
stays on monitor  
and images do  
ry pages by holding down  
[–] while turning power on  
(page 49).  
appear during are hidden.  
auto play.  
ry pages (page 49).  
not appear.  
Camera is con- 1. Function switch set to 1. Set function switch to  
nected to a TV, REC PLAY (page 33).  
but LCD monitor 2. Incorrect camera-TV 2. Connect correctly us-  
Delete operation 1. All pages are pro- 1. Unprotect the page  
does not start  
when DEL is  
pressed.  
tected.  
you want to delete  
(page 48).  
contents do not  
appear on TV  
screen.  
connection  
ing the special video  
cable that comes with  
the camera (page 35).  
3. Select the correct  
channel for video play-  
back. See the TV’s  
user documentation for  
details.  
2. Multi-page display 2. Change to a normal-  
(page 37) or zoom dis-  
play (page 41)  
size, 1-page display  
format.  
3. Wrong TV channel  
All buttons and Malfunction due to static Remove batteries and  
switches do not electrical charge or strong disconnect the AC adap-  
operate.  
impact  
tor if you are using one.  
Restore power and turn  
the camera on. If this  
does not work, contact  
your dealer or an autho-  
rized CASIO service pro-  
vider.  
Some images Protected memory pages Unhide protected memo-  
are missing.  
are hidden.  
ry pages by holding down  
[–] while turning power on  
(page 49).  
C a n n o t u s e Protected memory pages Unhide protected memo-  
Very bright or Wrong BRIGHT setting  
very dark LCD  
image  
Adjust the BRIGHT set-  
ting (page 11).  
multi-page dis- are hidden.  
play.  
ry pages by holding down  
[–] while turning power on  
(page 49).  
No buttons or Malfunction due to expos- Remove batteries and/or  
switches oper- ing camera to electro- unplug the AC adaptor.  
Cannot protect Protected memory pages Unhide protected memo-  
memory pages. are hidden.  
ry pages by holding down  
[–] while turning power on  
(page 49).  
ate.  
static charge.  
Reload batteries and/or  
plug in AC adaptor and try  
operation again.  
LCD monitor is Incorrect BRIGHT setting Adjust the BRIGHT  
too bright or too  
dark.  
(brightness) setting.  
65  
66  
Troubleshooting  
Action  
Reference  
Messages  
Sympton  
Probable Cause  
C a n n o t e x - 1. Incorrect cable con- 1. Connect correctly  
change data be- nection (page 59).  
tween two cam- 2. Camera connected to 2. Turn power on after  
eras is not turned on. connecting cable.  
3. Function switch sets to 3. Set function switch to  
REC. PLAY (page 33).  
MEMORY FULL  
All 96 memory pages are used. Pages must be de-  
leted (page 50) before further recording is possible.  
MEMORY EMPTY  
No images are stored in memory.  
MEMORY ERROR  
#1~#3  
Problem with internal memory. Contact your dealer or  
an authorized CASIO service provider.  
Cannot transfer 1. Sending camera’s 1. Correct the situation  
d a t a ( e r r o r memory is empty. and try again.  
keeps occur- 2. Receiving camera’s 2. Correct the situation  
ring) memory is full and try again.  
3. Receiving camera’s 3. C h a n g e f u n c t i o n  
CONSULT THE  
OWNER’S MANUAL!  
function switch is in  
REC position.  
switch setting of re-  
ceiving camera to  
PLAY (page 33).  
4. The message “ALL 4. The sending camera’s  
DATA IS PROTECT-  
ED” is on the monitor  
of the sending camera.  
protected memory  
pages are hidden. Un-  
hide protected memory  
pages by holding down  
[–] while turning power  
on (page 49).  
5. Low battery (indicated 5. Replace batteries or  
by  
)
use the AC adaptor  
(page 13).  
6. Disconnection of cable 6. Securely reconnect the  
during data communi-  
cation  
cable and turn power  
on.  
Keys of con- Connected camera op- Normal operation will re-  
nected camera eration is disabled during turn when you exit data  
are disabled.  
data communications.  
communications by press-  
ing EXIT.  
67  
68  
 
Specifications  
Reference  
Terminals ................ DIGITAL; VIDEO OUT; DC IN 6V  
General  
Power Supply .......... Batteries (AA-size Alkaline batteries X 4)/AC Adap-  
tor (AD-C60)  
Recording System ... Digital (JPEG based)/Field recording  
Signal System ......... NTSC  
Battery Life .............. Approximately 2 hours  
Recording Medium .. Built-in 16-Mbit flash memory  
Number of Pages .... 96  
Approximately 96 images  
(consecutive recording, one image per minute)  
Delete Functions ..... Single page; All pages (with page protect feature)  
Imaging Device ....... 1/5-inch CCD (Total Number of Pixels: 250,000)  
Dimensions ............. 72 (H) X 162 (W) X 49 (D)mm /  
2.8" (H) X 6.4" (W) X 1.9" (D)  
Lens ........................ 2 focal points with macro position: F2.8 f=4.0mm/  
f=9.0mm  
Weight ..................... Approximately 240g / 8.5oz (excluding batteries)  
Accessories............. Wrist strap; soft case; special video cable; Alkaline  
batteries (LR6 X 4); cleaning cloth; owner’s manual  
Aperture .................. F2.8/F8 manual switching  
Focal Length  
• The liquid crystal panel built into this camera is the product of preci-  
sion engineering, with an effective pixel rate of 99.99%. This also  
means, however that 0.01% of the pixels can be expected to fail to  
light or to remain lit at all times.  
f = 4.0mm  
Normal  
Macro  
F2.8  
F8  
50cm(1.6') ~  
24cm(9.4") ~ ∞  
10cm(3.9") ~ 13cm(5.1") 8cm(3.1") ~ 19cm(7.5")  
f = 9.0mm  
Normal  
Macro  
F2.8  
F8  
250cm(8.2') ~ ∞  
120cm(3.9') ~ ∞  
About the camera’s backlight…  
50cm(1.6') ~ 65cm(2.1') 40cm(1.3') ~ 95cm(3.1')  
• The camera is equipped with a fluorescent light source to provide  
the back lighting for its LCD.  
Light Metering ......... TTL center point by photographic element  
Exposure Metering .. Aperture priority AE  
Exposure Range ..... EV +5 to 18  
• The normal service life of the backlight is approximately six years,  
when the camera is used for about two hours a day.  
Exposure Adjustment .. -2EV to +2EV  
• Should the LCD image appear abnormally dark, take the camera to  
your dealer or an authorized CASIO service provider to have the  
light source replaced. Note that you will be charged for this replace-  
ment.  
Shutter System ....... Electronic  
Shutter Speed ......... 1/8 to 1/4000 second  
White Balance ......... Automatic  
Self-timer ................. 10-second  
• Under very cold conditions, the backlight may require more time  
than normal to light, or reddish bands may appear in the image.  
These conditions do not indicate malfunction, and normal operation  
should return at higher temperatures.  
Monitor .................... 61,380-pixel 2.5-inch TFT low-glare color LCD;  
doubles as finder  
69  
70  
 

Blomus Indoor Fireplace 65330 User Manual
Blue Rhino Landscape Lighting GTL7179SP User Manual
Bolens Blower TB720r User Manual
Bosch Appliances Security Camera LTC 9385 User Manual
Bosch Appliances Vacuum Cleaner 3931 User Manual
Brother Fax Machine MFC6490CW User Manual
Bushnell Boating Equipment 70 0101 User Manual
Bushnell Portable Speaker 94 0001 User Manual
Canon Photo Printer PRO9000 User Manual
Casio Computer Accessories CDP 200R User Manual