Braun Iron SI 3120 User Manual

SI 3240  
SI 3230  
SI 3120  
x a  
m
n i  
m
m a x  
1900  
Type 4 695  
Type 4 696  
4-671-354/00/XII-06  
Korea/GB  
 
C
vario  
m a x  
vario  
plus  
m a x  
power  
shot  
a x  
m
spray  
m a x  
dry  
m a x  
D
 
E
F
Cleaning the anti-calc valve  
1
2
3
c
t
n
a
0
a
6
4
5
7
i
t
n
a
i
t
n
a
0
0
vinegar or  
lemon juice  
Anticalc system  
1
G
2
3
4
max  
x
ma  
m
i
n
m
a
x
c
x
x
x
x
-jet  
Temp. OK  
5
6
7
0
i n  
m
a
m a x  
0
9
8
10  
11  
l
a
i
c
t
n
a
0
c
i
t
n
a
0
!
°
100 C  
0
e
Temp. OK  
13  
12  
t
je  
4x  
max  
max  
m
i
t
n
m
a
x
j
e
c
a x  
m
t  
x
x
j
t
 
 
 
English  
Our products are engineered to meet the highest  
standards of quality, functionality and design.  
We hope you enjoy your new Braun steam iron.  
Notice: Remove the label, if any, from the sole  
plate before first use.  
C Ironing  
Vario steam  
You can increase and reduce the quantity  
of steam by turning the steam regulator.  
The steam regulator and the temperature  
selector have to be set within the red  
range.  
Important Safeguards  
Before using the iron, read the use instruc-  
tions completely. Keep the use instructions  
during the entire life of the iron.  
Make sure your voltage corresponds to the  
voltage printed on the iron. Connect the iron  
to alternating current only.  
Always unplug the iron before filling with  
water. Always pull the plug, not the cord.  
The cord should never come in contact with  
the hot objects or the sole plate.  
Never immerse the iron in water or other  
liquids.  
Notice: While ironing, do not turn the  
steam regulator beyond the red range.  
For power shot and vario plus steam, the  
temperature selector must be set within the  
continuous red range.  
These functions can even be activated  
when dry ironing.  
We recommend a medium steam setting  
for all normal ironing. Only when ironing  
linen, thick cotton or similar fabrics we  
recommend the maximum steam setting.  
During ironing pauses, always place the  
iron upright on its heel rest. Unplug it when  
leaving the room, even if only for a short time.  
Keep the iron away from children. Electric  
irons combine high temperatures and hot  
steam that could lead to burns.  
Vario plus (model 3240 only)  
Press the steam plus button (6) for max.  
3 seconds, but not more often than 4 times  
per minute.  
Never iron or dampen clothes while wearing  
them.  
Check the cord regularly for possible  
damage.  
Power shot  
Press the power shot button (3) in intervals  
of at least 5 seconds.  
If the appliance (including cord) shows any  
defect, stop using it and take it to a Braun  
Service Centre for repair.  
Spray function  
Press the spray button (4).  
Faulty or unqualified repair work many cause  
accidents or injury to the user.  
Braun electric appliances meet applicable  
safety standards.  
Dry ironing  
Set the steam regulator (5) on position «0»  
(= steam off).  
Notice: Prior to ironing, press the power  
shot button 3 to 4 times to activate them.  
This function can be used for steaming  
hanging clothes.  
A Description  
1
2
3
4
5
6
7
8
Water tank opening  
Spray nozzle  
Power shot button  
Spray button  
Steam regulator  
Steam plus button (model 3240 only)  
Pilot light  
D After ironing  
Unplug the iron. To prolong the life of the  
iron, empty the water tank. Store the cool  
iron in a dry place always standing on its heel  
rest.  
Temperature selector  
B Before starting off  
• This iron is designed for tap water. If you have  
extremely hard water, we recommend to use  
a mixtur of 50 % tap water and 50 % distilled  
water. Fill the water tank to «max» marking.  
Never use distilled water exclusively. Do not  
add any additives (e.g. starch).  
E Maintenance and cleaning  
To clean the sole plate, use steel wool.  
Never use a scouring pad, vinegar or other  
chemicals.  
• Keep the iron in the upright position and  
connect it to the mains. Select the tempera-  
ture according to the ironing guide on the  
heel rest of the iron or on the label in your  
garments.  
• The pilot light goes off when the desired  
temperature is reached (after approx.  
1 ó min.).  
F Cleaning the anticalc valve  
The anticalc valve on the steam regulator  
has to be decalcified regularly (e.g. when-  
ever steam development is insufficient).  
For this, the water tank has to be empty.  
 
Removing the steam regulator with the  
anticalc valve  
Guarantee  
We grant 1 year guarantee on the product  
commencing on the date of purchase. Within  
the guarantee period we will eliminate, free of  
charge, any defects in the appliance resulting  
from faults in materials or workmanship, either  
by repairing or replacing the complete appliance  
as we may choose.  
Turn the steam regulator clockwise to the  
double arrow at the end of the anticalc  
section and it will lift. Pull it out vertically.  
Do not touch the anticalc valve at its lower  
end. Immerse the anticalc valve in vinegar  
(not vinegar essence) or lemon juice for  
minimum 30 minutes. Brush off remaining  
residues and rinse under running water  
(fig. F 1-5).  
This guarantee extends to every country where  
this appliance is supplied by Braun or its  
appointed distributor.  
This guarantee does not cover: damage due to  
improper use, normal wear or use as well as  
defects that have a negligible effect on the value  
or operation of the appliance. The guarantee  
becomes void if repairs are undertaken by  
unauthorised persons and if original Braun parts  
are not used.  
Re-inserting the steam regulator  
To re-insert the steam regulator follow fig.  
6 and 7.  
Notice: The iron must not be used without  
the steam regulator.  
To obtain service within the guarantee period,  
hand in or send the complete appliance with  
your sales receipt to an authorised Braun  
Customer Service Centre.  
G Decalcifying/anticalc system  
In order to clean the steam chamber from  
residues, decalcify it as shown in fig.  
G 1-11.  
Caution: Hot water and steam will come  
out from the sole plate when the steam  
regulator is turned clockwise into the anticalc  
area.  
Wait for the sole plate to cool down, then  
clean it as described above.  
Then refill the tank with water, heat up the  
iron and press the power shot button 4 times  
to rinse the iron before ironing (G 12-13).  
Do not use commercial decalcifiers, they  
may damage the iron.  
H Trouble-shooting guide  
Problem  
Remedy  
Drops coming  
out of the steam  
vents  
Turn the steam  
regulator counter-  
clock-wise to reduce  
the steam or turn it off.  
Take longer intervals  
when pressing the  
steam plus button.  
Less steam  
develops or no  
steam at all  
Check water level.  
Clean the anticalc  
valve.  
Calcium particles  
coming through  
the steam vents  
Decalcify the steam  
chamber.  
Subject to change without notice.  
This product conforms to the European  
Directives EMC 89/336/EEC and Low  
Voltage 73/23/EEC.  
 

Bolens Tiller 12206 User Manual
Breville Juicer 800JEXL User Manual
Briggs Stratton Yard Vacuum 37610701 04 User Manual
Bushnell Binoculars 11 0833 User Manual
Cabletron Systems Switch MICROMMAC User Manual
Canon Camcorder ZR950 A User Manual
Canon Camera Lens 2578A002 User Manual
Chauvet Landscape Lighting 1014 User Manual
Cisco Systems Frozen Dessert Maker SR 207 User Manual
Cisco Systems Network Card OL 10426 01 User Manual