Beko Washer WMB 81641 LC User Manual

WMB 81641 LC  
Washing Machine  
Users Manual  
Document Number  
2820522804_EN/161012.1518  
 
TABLE OF CONTENTS  
1 Your washing machine  
4
Main programmes . . . . . . . . . . . . . . . 18  
Additional programmes . . . . . . . . . . . . 19  
Temperature selection . . . . . . . . . . . . . 20  
Spin speed selection . . . . . . . . . . . . . . 20  
Programme and consumption table. . . 21  
Auxiliary function selection. . . . . . . . . . 23  
Time display . . . . . . . . . . . . . . . . . . . . 24  
Starting the programme. . . . . . . . . . . . 24  
Progress of programme. . . . . . . . . . . . 24  
Loading door lock . . . . . . . . . . . . . . . . 25  
Changing the selections after programme  
has started . . . . . . . . . . . . . . . . . . . . . 25  
Child Lock. . . . . . . . . . . . . . . . . . . . . . 25  
Cancelling the programme. . . . . . . . . . 26  
Machine is in Rinse Hold mode . . . . . . 26  
End of programme . . . . . . . . . . . . . . . 26  
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4  
Technical specifications . . . . . . . . . . . . . 5  
2 Important safety  
instructions  
6
General safety . . . . . . . . . . . . . . . . . . . . 6  
Intended use . . . . . . . . . . . . . . . . . . . . . 6  
Children's safety . . . . . . . . . . . . . . . . . . 7  
3 Installation  
8
Appropriate installation location . . . . . . . 8  
Removing packaging reinforcement. . . . 8  
Removing the transportation locks. . . . . 8  
Connecting water supply. . . . . . . . . . . . 9  
Connecting to the drain . . . . . . . . . . . . . 9  
Adjusting the feet. . . . . . . . . . . . . . . . . 10  
Electrical connection . . . . . . . . . . . . . . 10  
First use . . . . . . . . . . . . . . . . . . . . . . . 11  
Disposing of packaging material . . . . . 11  
Transportation of the product. . . . . . . . 11  
Disposing of the old product . . . . . . . . 11  
6 Maintenance and cleaning27  
Cleaning the detergent drawer. . . . . . . 27  
Cleaning the loading door and the  
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning the body and control panel . . 27  
Cleaning the water intake filters . . . . . . 28  
Draining remaining water and cleaning the  
pump filter . . . . . . . . . . . . . . . . . . . . . . 28  
4 Preparation  
12  
Things to be done for energy saving . . 12  
Sorting the laundry . . . . . . . . . . . . . . . 12  
Preparing laundry for washing . . . . . . . 12  
Correct load capacity . . . . . . . . . . . . . 13  
Loading the laundry. . . . . . . . . . . . . . . 13  
Using detergent and softener . . . . . . . 14  
Tips for efficient washing . . . . . . . . . . . 16  
7 Troubleshooting  
30  
5 Operating the product  
17  
Control panel. . . . . . . . . . . . . . . . . . . . 17  
Display symbols. . . . . . . . . . . . . . . . . . 18  
Preparing the machine. . . . . . . . . . . . . 18  
Programme selection. . . . . . . . . . . . . . 18  
 
3
EN  
1 Your washing machine  
Overview  
8
1
2
3
7
6
4
5
1- Power cable  
2- Top panel  
3- Control panel  
4- Filter cap  
5- Adjustable feet  
6- Loading door  
7- Detergent drawer  
8- Drain hose  
 
4
EN  
Technical specifications  
Models (EN)  
WMB 81641 LC  
Maximum dry laundry capacity (kg)  
Height (cm)  
8
84  
Width (cm)  
60  
Depth (cm)  
59  
Net weight ( 4 kg.)  
Electrical input (V/Hz)  
Total current (A)  
75  
220-240 V / 50Hz  
10  
Total power (W)  
2000-2300  
1600  
Spin speed (rpm max.)  
Main model code  
918  
Single Water inlet / Double Water inlet  
• / -  
Woolmark No:  
M1226  
• Available  
“The Wool wash cycle of this machine has been tested and approved by  
The Woolmark Company for the washing of Woolmark garments labelled  
as “machine wash” provided that the garments are washed according to  
the instructions on the garment label and those issued by the manufacturer  
of this washing machine.”  
Technical specifications may be changed without prior notice to improve the quality of  
the product.  
C
Figures in this manual are schematic and may not match the product exactly.  
Values stated on the product labels or in the documentation accompanying it  
are obtained in laboratory conditions in accordance with the relevant standards.  
Depending on operational and environmental conditions of the product, these values  
may vary.  
C
C
 
5
EN  
2 Important safety instructions  
This section contains safety instructions  
that will help protect from risk of personal  
injury or property damage. Failure to follow  
these instructions shall void any warranty.  
by a qualified electrician. Our company  
shall not be liable for any damages  
that will arise when the product is used  
without grounding in accordance with  
the local regulations.  
The water supply and draining hoses  
must be securely fastened and remain  
undamaged. Otherwise, there is the  
risk of water leakage.  
Never open the loading door or remove  
the filter while there is still water in the  
drum. Otherwise, risk of flooding and  
injury from hot water will occur.  
Do not force open the locked loading  
door. The loading door will be ready  
to open just a few minutes after the  
washing cycle comes to an end.  
In case of forcing the loading door  
to open, the door and the lock  
mechanism may get damaged.  
Unplug the product when not in use.  
Never wash the product by spreading  
or pouring water onto it! There is the  
risk of electric shock!  
General safety  
This product should not be used  
by persons with physical, sensory  
or mental disorders or unlearned  
or inexperienced people (including  
children) unless they are attended by  
a person who will be responsible for  
their safety or who will instruct them  
accordingly for use of the product.  
8 years and older children and people  
with reduced physical, sensory, and  
mental abilities as well as unskilled  
or inexperienced persons can use  
this appliance provided that they are  
supervised and instructed on safe  
use of the appliance as well as to the  
related dangers. Children should not  
play or tamper with the appliance.  
Cleaning and user maintenance should  
never be performed by children unless  
supervised by a responsible adult.  
Never place the product on a carpet-  
covered floor; otherwise, lack of  
airflow beneath the machine will cause  
electrical parts to overheat. This will  
cause problems with your product.  
Do not operate the product if the  
power cable / plug is damaged. Call a  
qualified electrician.  
Never touch the plug with wet hands!  
Never unplug by pulling on the cable,  
always pull out by grabbing the plug.  
Use detergents, softeners and  
supplements suitable for automatic  
washing machines only.  
Follow the instructions on the textile  
tags and on the detergent package.  
The product must be unplugged during  
installation, maintenance, cleaning and  
repairing procedures.  
Always have the installation and  
repairing procedures carried out  
by the Authorized Service Agent.  
Manufacturer shall not be held liable  
for damages that may arise from  
procedures carried out by unauthorized  
persons.  
Have a qualified electrician connect  
a 16-Ampere fuse to the installation  
location of the product.  
If the product has a failure, it should not  
be operated unless it is repaired by the  
Authorized Service Agent. There is the  
risk of electric shock!  
This product is designed to resume  
operating in the event of powering on  
after a power interruption. If you wish to  
cancel the programme, see "Cancelling  
the programme" section.  
Intended use  
This product has been designed for  
domestic use. It is not suitable for  
commercial use and it must not be  
used out of its intended use.  
Connect the product to a grounded  
outlet protected by a fuse complying  
with the values in the "Technical  
specifications" table. Do not neglect to  
have the grounding installation made  
The product must only be used for  
washing and rinsing of laundry that are  
marked accordingly.  
 
6
EN  
The manufacturer waives any  
responsibility arisen from incorrect  
usage or transportation.  
Children's safety  
Electrical products are dangerous for  
the children. Keep children away from  
the product when it is in use. Do not  
let them to tamper with the product.  
Use child lock to prevent children from  
intervening with the product.  
Do not forget to close the loading  
door when leaving the room where the  
product is located.  
Store all detergents and additives in a  
safe place away from the reach of the  
children.  
 
7
EN  
3 Installation  
It is the customers responsibility to arrange  
a suitably qualified installer to correctly  
install this product. To make the product  
ready for use, review the information in  
the user manual and make sure that the  
electricity, tap water supply and water  
drainage systems are appropriate before  
calling the qualified Installer. If they are not,  
call a qualified technician and plumber to  
have any necessary arrangements carried  
out.  
Removing packaging  
reinforcement  
Tilt the machine backwards to remove  
the packaging reinforcement. Remove the  
packaging reinforcement by pulling the  
ribbon.  
Preparation of the location and  
C
electrical, tap water and waste water  
installations at the place of installation  
is under customer's responsibility.  
Installation and electrical connections  
B
of the product must be carried out by  
a qualified installer. Manufacturer shall  
not be held liable for damages that may  
arise from procedures carried out by  
unauthorized persons.  
Prior to installation, visually check if  
A
the product has any defects on it. If  
so, do not have it installed. Damaged  
products cause risks for your safety.  
Removing the  
transportation locks  
Do not remove the transportation  
Make sure that the water inlet and  
A
C
locks before taking out the packaging  
reinforcement.  
discharge hoses as well as the power  
cable are not folded, pinched or  
crushed while pushing the product into  
its place after installation or cleaning  
procedures.  
Remove the transportation safety  
A
bolts before operating the washing  
machine, otherwise, the product will be  
damaged.  
Appropriate installation location  
1. Loosen all the bolts with a spanner until  
they rotate freely (C).  
Place the machine on a rigid floor. Do  
not place it on a long pile rug or similar  
surfaces.  
Total weight of the washing machine  
and the dryer -with full load- when  
they are placed on top of each other  
reaches to approx. 180 kilograms.  
Place the product on a solid and flat  
floor that has sufficient load carrying  
capacity!  
2. Remove transportation safety bolts by  
turning them gently.  
Do not place the product on the power  
cable.  
Do not install the product at places  
where temperature may fall below 0ºC.  
Place the product at least 1 cm away  
from the edges of other furniture.  
 
8
EN  
3. Attach the plastic covers supplied in  
the User Manual bag into the holes on  
the rear panel. (P)  
Keep the transportation safety bolts in  
C
a safe place to reuse when the washing  
machine needs to be moved again in  
the future.  
Ensure that the cold and hot water  
connections are made correctly when  
installing the product. Otherwise, your  
laundry will come out hot at the end of  
the washing process and wear out.  
A
Never move the product without the  
transportation safety bolts properly  
fixed in place!  
C
2. Tighten all hose nuts by hand. Never  
use a wrench when tightening the nuts.  
Connecting water supply  
The water supply pressure required  
C
to run the product is between 1 to 10  
bars (0.1 – 1 MPa). It is necessary to  
have 10 – 80 liters of water flowing  
from the fully open tap in one minute  
to have your machine run smoothly.  
Attach a pressure reducing valve if  
water pressure is higher.  
If you are going to use the double  
C
3. Open the taps completely after making  
the hose connection to check for  
water leaks at the connection points.  
If any leaks occur, turn off the tap and  
remove the nut. Retighten the nut  
carefully after checking the seal. To  
prevent water leakages and damages  
caused by them, keep the taps closed  
when the machine is not in use.  
water-inlet product as a single (cold)  
water-inlet unit, you must install the  
supplied stopper to the hot water valve  
before operating the product. (Applies  
for the products supplied with a blind  
stopper group.)  
If you want to use both water inlets  
C
of the product, connect the hot water  
hose after removing the stopper and  
gasket group from the hot water valve.  
(Applies for the products supplied with  
a blind stopper group.)  
Connecting to the drain  
The end of the drain hose must be  
directly connected to the wastewater  
drain or to the washbasin.  
Models with a single water inlet should  
A
Your house will be flooded if the  
hose comes out of its housing during  
water discharge. Moreover, there is  
risk of scalding due to high washing  
temperatures! To prevent such  
situations and to ensure smooth water  
intake and discharge of the machine,  
fix the end of the discharge hose tightly  
so that it cannot come out.  
not be connected to the hot water  
tap. In such a case the laundry will get  
damaged or the product will switch to  
protection mode and will not operate.  
A
Do not use old or used water inlet  
A
hoses on the new product. It may  
cause stains on your laundry.  
1. Connect the special hoses supplied  
with the product to the water inlets  
on the product. Red hose (left) (max.  
90 ºC) is for hot water inlet, blue hose  
(right) (max. 25 ºC) is for cold water  
inlet.  
The hose should be attached to a  
height of at least 60 cm, and 90 cm at  
most.  
 
9
EN  
In case the hose is elevated after  
laying it on the floor level or close to  
the ground (less than 60 cm above the  
ground), water discharge becomes  
more difficult and the laundry may  
come out excessively wet. Therefore,  
follow the heights described in the  
figure.  
the hose must not be pinched between  
the drain and the machine.  
If the length of the hose is too short,  
use it by adding an original extension  
hose. Length of the hose may not be  
longer than 3.2 m. To avoid water leak  
failures, the connection between the  
extension hose and the drain hose of  
the product must be fitted well with an  
appropriate clamp as not to come off  
and leak.  
Adjusting the feet  
In order to ensure that the product  
A
operates more silent and vibration-free,  
it must stand level and balanced on its  
feet. Balance the machine by adjusting  
the feet. Otherwise, the product  
may move from its place and cause  
crushing and vibration problems.  
1. Loosen the lock nuts on the feet by  
hand.  
2. Adjust the feet until the product stands  
level and balanced.  
3. Tighten all lock nuts again by hand.  
Do not use any tools to loosen the lock  
A
To prevent flowing of dirty water back  
into the machine and to allow for easy  
discharge, do not immerse the hose  
end into the dirty water or drive it in the  
drain more than 15 cm. If it is too long,  
cut it short.  
nuts. Otherwise, they will get damaged.  
Electrical connection  
Connect the product to a grounded outlet  
protected by a fuse complying with the  
values in the "Technical specifications"  
table. Our company shall not be liable  
for any damages that will arise when the  
The end of the hose should not be  
bent, it should not be stepped on and  
 
10  
EN  
product is used without grounding in  
accordance with the local regulations.  
Some water might have remained in  
the product due to the quality control  
processes in the production. It is not  
harmful for the product.  
C
Connection must comply with national  
regulations.  
Power cable plug must be within easy  
reach after installation.  
The voltage and allowed fuse or  
breaker protection are specified in the  
Technical specifications” section. If the  
current value of the fuse or breaker in  
the house is less than 16 Amps, have  
a qualified electrician install a 16 Amp  
fuse.  
Disposing of packaging material  
Packaging materials are dangerous to  
children. Keep packaging materials in a  
safe place away from reach of the children.  
Packaging materials of the product are  
manufactured from recyclable materials.  
Dispose of them properly and sort  
in accordance with recycled waste  
instructions. Do not dispose of them with  
normal domestic waste.  
Transportation of the product  
1. Unplug the product before transporting  
it.  
2. Remove water drain and water supply  
connections.  
3. Drain the remaining water in the  
product completely; see, "Draining  
remaining water and cleaning the pump  
filter".  
4. Install transportation safety bolts in the  
reverse order of removal procedure;  
see, "Removing the transportation  
locks".  
The specified voltage must be equal to  
your mains voltage.  
Do not make connections via extension  
cables or multi-plugs.  
Damaged power cables must be  
replaced by the Authorized Service  
Agents.  
B
First use  
Before starting to use the product, make  
sure that all preparations are made in  
accordance with the instructions in  
sections "Important safety instructions" and  
"Installation".  
To prepare the product for washing laundry,  
perform first operation in Drum Cleaning  
programme. If your machine is not  
featured with Drum Cleaning programme,  
use Cottons-90 programme and select  
Additional Water or Extra Rinse auxiliary  
functions as well. Before starting the  
programme, put max. 100 g of powder  
anti-limescale into the main wash detergent  
compartment (compartment nr. II). If the  
anti-limescale is in tablet form, put only  
one tablet into compartment nr. II. Dry the  
inside of the bellow with a clean piece of  
cloth after the programme has come to an  
end.  
Never move the product without the  
transportation safety bolts properly  
fixed in place!  
C
Disposing of the old product  
Dispose of the old product in an  
environmentally friendly manner.  
Refer to your local dealer or solid waste  
collection centre in your area to learn how  
to dispose of your product.  
For children's safety, cut the power cable  
and break the locking mechanism of the  
loading door so that it will be nonfunctional  
before disposing of the product.  
Use an anti-limescale suitable for the  
washing machines.  
C
 
11  
EN  
4 Preparation  
Things to be done for  
energy saving  
Following information will help you use  
the product in an ecological and energy-  
efficient manner.  
Wash with sensitive,  
.short programmes  
Washing water  
temperature  
Operate the product in the highest  
capacity allowed by the programme  
you have selected, but do not overload;  
see, “Programme and consumption  
table”.  
Do not use bleach  
Bleach can be  
used  
Always follow the instructions on the  
detergent packaging.  
Wash slightly soiled laundry at low  
temperatures.  
Use faster programmes for small  
quantities of lightly soiled laundry.  
Do not use prewash and high  
temperatures for laundry that is not  
heavily soiled or stained.  
Suitable for drier  
Do not dry with drier  
Hang without  
spinning  
Can be ironed with  
hot iron  
If you plan to dry your laundry in a  
dryer, select the highest spin speed  
recommended during washing  
process.  
Do not use detergent in excess of  
the amount recommended on the  
detergent package.  
Non machine-washable  
Do not wash  
Do not dry-clean  
Dry on a hanger  
Dry-cleanable  
Sorting the laundry  
Sort laundry according to type of  
fabric, colour, and degree of soiling and  
allowable water temperature.  
Always obey the instructions given on  
the garment tags.  
Dry horizontally  
Can be ironed  
with warm iron  
Do not iron  
Preparing laundry for washing  
Laundry items with metal attachments  
such as, underwired bras, belt buckles  
or metal buttons will damage the  
machine. Remove the metal pieces or  
wash the clothes by putting them in a  
laundry bag or pillow case.  
 
12  
EN  
and the washing programme desired.  
The machine automatically adjusts the  
amount of water according to the weight of  
the loaded laundry.  
Follow the information in the  
A
“Programme and consumption table”.  
When overloaded, machines washing  
performance will drop. Moreover, noise  
and vibration problems may occur.  
Laundry types and their average weights in  
the following table are given as examples.  
Take out all substances in the pockets  
such as coins, pens and paper clips,  
and turn pockets inside out and brush.  
Such objects may damage the product  
or cause noise problem.  
Put small size clothes such as infants  
socks and nylon stockings in a laundry  
bag or pillow case.  
Place curtains in without compressing  
them. Remove curtain attachment  
items.  
Fasten zippers, sew loose buttons and  
mend rips and tears.  
Wash “machine washable” or “hand  
washable” labeled products only with  
an appropriate programme.  
Do not wash colours and whites  
together. New, dark coloured cottons  
release a lot of dye. Wash them  
separately.  
Tough stains must be treated properly  
before washing. If unsure, check with a  
dry cleaner.  
Use only dyes/colour changers  
and limescale removers suitable for  
machine wash. Always follow the  
instructions on the package.  
Laundry type  
Bathrobe  
Napkin  
Weight (g)  
1200  
100  
Duvet cover  
Bed Sheet  
Pillowcase  
Tablecloth  
Towel  
700  
500  
200  
250  
200  
Hand towel  
Evening gown  
Underclothing  
Mens overalls  
Mens shirt  
Mens pajamas  
Blouses  
100  
200  
100  
600  
200  
500  
100  
Loading the laundry  
Open the loading door.  
Place laundry items loosely into the  
machine.  
Push the loading door to close until you  
hear a locking sound. Ensure that no  
items are caught in the door.  
The loading door is locked while a  
programme is running. The door  
can only be opened a while after the  
programme comes to an end.  
In case of misplacing the laundry, noise  
and vibration problems may occur in  
the machine.  
Wash trousers and delicate laundry  
turned inside out.  
C
Keep laundry items made of Angora  
wool in the freezer for a few hours  
before washing. This will reduce pilling.  
Laundry that are subjected to materials  
such as flour, lime dust, milk powder,  
etc. intensely must be shaken off  
before placing into the machine. Such  
dusts and powders on the laundry  
may build up on the inner parts of  
the machine in time and can cause  
damage.  
A
Correct load capacity  
The maximum load capacity depends on  
the type of laundry, the degree of soiling  
 
13  
EN  
When washing dark coloured clothes  
and quilts, it is recommended to use  
liquid detergent.  
Wash woolens with special detergent  
made specifically for woolens.  
Use only detergents manufactured  
specifically for washing machines.  
Using detergent and softener  
Detergent Drawer  
The detergent drawer is composed of three  
compartments:  
- (1) for prewash  
A
- (2) for main wash  
– (3) for softener  
ADo not use soap powder.  
– (*) in addition, there is siphon piece in the  
softener compartment.  
Adjusting detergent amount  
The amount of washing detergent to be  
used depends on the amount of laundry,  
the degree of soiling and water hardness.  
Read the manufacturers instructions on  
the detergent package carefully and follow  
the dosage values.  
3
1
2
Do not use amounts exceeding the  
dosage quantities recommended  
on the detergent package to avoid  
problems of excessive foam, poor  
rinsing, financial savings and finally,  
environmental protection.  
Use lesser detergent for small amounts  
or lightly soiled clothes.  
Use concentrated detergents in the  
recommended dosage.  
The detergent dispenser may be in two  
different types according to the model  
of your machine as seen above.  
C
Detergent, softener and other cleaning  
agents  
Add detergent and softener before  
starting the washing programme.  
Never open the detergent drawer while  
the washing programme is running!  
When using a programme without  
prewash, do not put any detergent  
into the prewash compartment  
(compartment nr. 1).  
Using softeners  
Pour the softener into the softener  
compartment of the detergent drawer.  
Use the dosages recommended on the  
package.  
Do not exceed the (>max<) level  
marking in the softener compartment.  
If the softener has lost its fluidity, dilute  
it with water before putting it in the  
detergent drawer.  
In a programme with prewash, do not  
put liquid detergent into the prewash  
compartment (compartment nr. 1).  
Do not select a programme with  
prewash if you are using a detergent  
bag or dispensing ball. Place the  
detergent bag or the dispensing ball  
directly among the laundry in the  
machine.  
If you are using liquid detergent, do  
not forget to place the liquid detergent  
cup into the main wash compartment  
(compartment nr. 2).  
Using liquid detergents  
If the product contains a liquid  
detergent cup:  
Make sure that you have placed the  
liquid detergent cup in compartment nr.  
“2”.  
Use the detergent manufacturers  
measuring cup and follow the  
instructions on the package.  
Use the dosages recommended on the  
package.  
Choosing the detergent type  
The type of detergent to be used depends  
on the type and colour of the fabric.  
Use different detergents for coloured  
and white laundry.  
Wash your delicate clothes only with  
special detergents (liquid detergent,  
wool shampoo, etc.) used solely for  
delicate clothes.  
If the liquid detergent has lost its fluidity,  
dilute it with water before putting in the  
detergent cup.  
 
14  
EN  
detergent between the laundry, close  
to the lower part of the drum in future  
washings.  
Use the tablet or gel detergent without  
selecting the prewash function.  
C
Using starch  
Add liquid starch, powder starch or the  
dyestuff into the softener compartment  
as instructed on the package.  
Do not use softener and starch  
together in a washing cycle.  
Wipe the inside of the machine with  
a damp and clean cloth after using  
starch.  
Using bleaches  
If the product does not contain a liquid  
detergent cup:  
Select a programme with prewash  
and add the bleaching agent at the  
beginning of the prewash. Do not put  
detergent in the prewash compartment.  
As an alternative application, select a  
programme with extra rinse and add  
the bleaching agent while the machine  
is taking water from the detergent  
compartment during first rinsing step.  
Do not use bleaching agent and  
detergent by mixing them.  
Use just a little amount (approx. 50  
ml) of bleaching agent and rinse the  
clothes very well as it causes skin  
irritation. Do not pour the bleaching  
agent onto the clothes and do not use  
it for coloured clothes.  
Do not use liquid detergent for the  
prewash in a programme with prewash.  
Use the detergent manufacturers  
measuring cup and follow the  
instructions on the package.  
Liquid detergent stains your clothes  
when used with Delayed Start function.  
If you are going to use the Delayed  
Start function, do not use liquid  
detergent.  
Using gel and tablet detergent  
When using tablet, gel, etc. detergents,  
read the manufacturers instructions on  
the detergent package carefully and  
follow the dosage values. If there is not  
any instruction on the package, apply the  
following.  
When using oxygen based bleaches,  
follow the instructions on the package  
and select a programme that washes  
at a lower temperature.  
Oxygen based bleaches can be used  
together with detergents; however,  
if its thickness is not the same with  
the detergent, put the detergent first  
into the compartment nr. II” in the  
detergent drawer and wait until the  
detergent flows while the machine  
is taking in water. Add the bleaching  
agent from the same compartment  
while the machine is still taking in water.  
If the gel detergent thickness is fluidal  
and your machine does not contain  
a special liquid detergent cup, put  
the gel detergent into the main wash  
detergent compartment during first  
water intake. If your machine contains  
a liquid detergent cup, fill the detergent  
into this cup before starting the  
programme.  
If the gel detergent thickness is not  
fluidal or in the shape of capsule liquid  
tablet, put it directly into the drum  
before washing.  
Using limescale remover  
Put tablet detergents into the main  
wash compartment (compartment  
nr. II) or directly into the drum before  
washing.  
When required, use limescale removers  
manufactured specifically for washing  
machines only.  
Always follow instructions on the  
package.  
Tablet detergents may leave residues  
in the detergent compartment. If you  
encounter such a case, place the tablet  
C
 
15  
EN  
Tips for efficient washing  
Clothes  
Colors  
(Recommended  
Light colours and  
whites  
Delicates/  
Woolens/Silks  
Dark colors  
(Recommended (Recommended  
(Recommended  
temperature  
range based  
temperature  
range based  
temperature range temperature range  
based on soiling  
level: 40-90C)  
based on soiling level:  
cold-40C)  
on soiling level: on soiling level:  
cold-40C)  
cold-30C)  
It may be  
necessary to pre-  
treat the stains of  
perform prewash.  
Powder and  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended  
for heavily soiled  
clothes. It is  
Liquid  
Prefer liquid  
detergents  
produced for  
detergents  
suitable for  
Heavily Soiled  
heavily soiled clothes. colours and dark delicate clothes.  
(difficult stains  
such as grass,  
coffee, fruits  
and blood.)  
It is recommended  
to use powder  
colours can be Woollen and silk  
used at dosages clothes must  
recommended be washed with  
for heavily soiled special woollen  
detergents to clean  
clay and soil stains  
recommended  
to use powder  
and the stains that are clothes.  
detergents.  
detergents to clean sensitive to bleaches.  
clay and soil stains Use detergents  
and the stains that without bleach.  
are sensitive to  
bleaches.  
Powder and  
Liquid  
Prefer liquid  
detergents  
produced for  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
normally soiled  
clothes. Use  
Normally Soiled  
detergents  
suitable for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended for  
normally soiled  
clothes.  
colours and dark delicate clothes.  
colours can be Woollen and silk  
used at dosages clothes must  
recommended be washed with  
for normally  
soiled clothes.  
(For example,  
stains caused  
by body on  
collars and  
cuffs)  
special woollen  
detergents.  
detergents without  
bleach.  
Powder and  
Liquid  
Prefer liquid  
detergents  
produced for  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
detergents  
suitable for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended for  
Lightly Soiled  
colours and dark delicate clothes.  
colours can be Woollen and silk  
used at dosages clothes must  
(No visible  
stains exist.)  
lightly soiled clothes. recommended be washed with  
lightly soiled clothes. Use detergents  
without bleach.  
for lightly soiled special woollen  
clothes. detergents.  
 
16  
EN  
5 Operating the product  
Control panel  
1
2
3
4
5
6
7
8
1
-
-
-
-
-
-
-
-
Spin Speed Adjustment button  
Display  
Temperature Adjustment button  
Programme Selection knob  
On / Off button  
Delayed Start buttons (+ / -)  
Auxiliary Function buttons  
Start / Pause / Cancel button  
2
3
4
5
6
7
8
 
17  
EN  
temperature.  
Display symbols  
Always select the lowest required  
temperature. Higher temperature  
means higher power consumption.  
For further programme details, see  
"Programme and consumption table".  
C
C
Main programmes  
Depending on the type of fabric, use the  
following main programmes.  
• Cottons  
F3  
F2  
F1  
F4  
Use this programme for your durable  
whites and colourfast cotton clothes. This  
programme is suggested for washing  
heavily soiled items.  
• Easy Care  
a
b
c
d
e
- Spin Speed indicator  
- Temperature indicator  
- Spin symbol  
- Temperature symbol  
- Remaining Time and Delayed Start  
indicator  
Use this programme to wash your  
synthetic or blended clothes (shirts,  
blouses,synthetic/cotton blends, etc.).  
It washes with a gentle action and has  
a shorter washing cycle compared to  
Cottons programme.  
f
- Programme Indicator symbols  
(Prewash / Main Wash / Rinse /  
Softener / Spin)  
For curtains and tulle, use the easy  
care 40˚C programme with prewash  
and easy iron functions selected. As  
their meshed texture causes excessive  
foaming, wash the veils/tulle by putting little  
amount of detergent into the main wash  
compartment. Do not put detergent in the  
prewash compartment.  
g
h
i
j
k
l
- Economy symbol  
- Delayed Start symbol  
- Door Locked symbol  
- Start symbol  
- Pause symbol  
- Auxiliary Function symbols  
No Water symbol  
• Wool  
Use this programme to wash your woolen  
clothes. Select the appropriate temperature  
complying with the tags of your clothes.  
Use appropriate detergents for woolens.  
m -  
Preparing the machine  
1. Make sure that the hoses are  
connected tightly.  
“The Wool wash cycle of this machine  
has been tested and approved by  
The Woolmark Company for the  
washing of Woolmark garments  
labelled as “machine wash”  
provided that the garments are  
washed according to the instructions  
on the garment label and those  
issued by the manufacturer of this  
washing machine.”  
2. Plug in your machine.  
3. Turn the tap on completely.  
4. Place the laundry in the machine.  
5. Add detergent and fabric softener.  
Programme selection  
1. Select the programme suitable for  
the type, quantity and soiling degree  
of the laundry in accordance with the  
• Cottons Eco  
"Programme and consumption table"  
2. Select the desired programme with the  
Programme Selection button.  
You may wash your normally soiled whites  
and light coloured cotton clothes in this  
programme. This programme ensures the  
highest energy and water saving compared  
to all other wash programmes suitable for  
cottons.  
Programmes are limited with the  
C
highest spin speed appropriate for that  
particular type of fabric.  
When selecting a programme, always  
C
consider the type of fabric, colour,  
degree of soiling and permissible water  
 
18  
EN  
Bedding/Blanket  
Additional programmes  
For special cases, additional programmes  
are available in the machine.  
Use this programme to wash your bedding  
items (pillows or cushions with polyester  
filling, bedspreads) and blankets. Make  
sure that all items are “machine washable”  
and loaded correctly not to damage the  
machine (e.g. Fold the blanket into two or  
more and pay attention to load it in a way  
that it will not touch the door gasket)  
Additional programmes may differ  
C
according to the model of the machine.  
Anti Allergy +  
Use this programme for your laundry for  
which you require an anti-allergic and  
hygienic washing at high temperature with  
intensive and long washing cycles.  
Anti Allergy + 60°C programme is  
tested and approved by “The British  
Allergy Foundation” (Allergy UK) in  
United Kingdom.  
• Delicates  
Use this programme to wash delicate  
clothes such as silk & viscose  
undergarments and lingerie. Remove any  
non-washable items and accessories from  
laundry before washing. Place small items  
(e.g. bras, stockings) in a washing bag.  
This programme is also recommended to  
wash your delicate clothes that bear “not  
machine washable” tags and for which  
hand wash is recommended.  
Daily Quick  
Do not wash cotton/feather filled  
C
pillows or duvets in the machine.  
Do not wash carpets and rugs in your  
A
machine. This might cause permanent  
damage on your machine.  
Use this programme to wash your lightly  
soiled clothes.  
Quick 14’  
• Refresh  
Use this programme to remove the odour  
on the laundry that are worn only for once  
and do not contain any stains or dirt.  
• Self Clean  
Use this programme to wash a few number  
of lightly soiled clothes worn for a short  
time.  
Jeans  
This special cycle provides better machine  
hygiene by heating the water up to  
70ºC. During the Self Clean program,  
the detergent drawer, pipes, drum and  
tub receive the necessary cleaning  
automatically. This special cycle program  
cleans the tub while it is empty to ensure  
that residuals do not accumulate in the tub  
after the wash  
Use this programme to wash your dark  
coloured and coloured clothes without  
fading them. You can also wash your  
normally or lightly soiled jeans and  
denim jackets in this programme. It  
is recommended to use special liquid  
detergents suitable for coloured/dark  
coloured clothes.  
• Rinse  
• Shirts  
Use this programme when you want to  
rinse or starch separately.  
Use this programme to wash cotton,  
synthetic or blended business shirts and  
blouses.  
Drain+Spin  
• Fasion Care  
Use this programme to apply an additional  
spin cycle for your laundry or to drain the  
water in the machine. Before selecting this  
programme, select the desired spin speed  
and press Start / Pause button. First, the  
machine will drain the water inside of it.  
Then, it will spin the laundry with the set  
spin speed and drain the water coming  
You can use this program to wash your  
laundry that bear “viscous and viscous  
blends” labels or which are advised to  
be washed with delicate programs. It  
cleans your laundry without causing  
any deformation to them. E.g.: Blouses,  
dresses, skirts and etc.  
 
19  
EN  
out of them. If you wish to drain only  
the water without spinning your laundry,  
select the Drain+Spin programme and  
then select the No Spin function with the  
help of Spin Speed Adjustment button.  
Press Start / Pause button.  
Spin speed selection  
Whenever a new programme is selected,  
the recommended spin speed of the  
selected programme is displayed on the  
spin speed indicator.  
To decrease the spin speed, press  
the Spin Speed Adjustment button.  
Spin speed decreases gradually.  
Then, depending on the model of the  
product, "Rinse Hold" and "No Spin"  
options appear on the display. See  
"Auxiliary function selection" section for  
explanations of these options.  
Use a lower spin speed for delicate  
C
items.  
Temperature selection  
Whenever a new programme is selected,  
the maximum temperature for the  
selected programme appears on the  
temperature indicator.  
CRinse Hold option is indicated with “  
To decrease the temperature, press  
the Temperature Adjustment button.  
Temperature decreases with increments  
of 10° and finally, -” symbol is indicated  
on the temperature display.  
” symbol and No Spin option is  
indicated with “ ” symbol.  
Cold Wash Option  
This option is available, when “-“ symbol  
appears on the temperature display. Cold  
Wash option is selectable at all of the  
washing programs. By the help of this,  
Cold wash can be done at each of the  
laundry types, special to the selected  
programme. You will save energy for your  
lightly soiled items, while using this option.  
If you scroll to cold wash option and  
C
press Temperature Adjustment button  
again, the recommended temperature  
for the selected programme appears  
on the display. Press the Temperature  
Adjustment button again to decrease  
the temperature.  
Economy symbol  
Indicates the programmes and  
temperatures that provide energy savings.  
 
20  
EN  
Programme and consumption table  
EN  
Auxiliary functions  
Selectable  
temperature range  
°C  
Programme  
Cottons  
90  
60  
40  
90  
40**  
Cold  
60  
40  
40  
30  
40  
30  
90  
60  
30  
40  
40  
60  
70  
-
8
8
8
8
8
8
4
4
3
1
-
70 2.60 1600  
70 1.75 1600  
70 0.90 1600  
100 2.25 1600  
69 0.90 1600  
69 0.45 1600  
56 0.90 1200  
56 0.50 1200  
36 0.36 600  
50 0.25 1200  
55 0.75 1200  
42 0.10 1400  
65 2.22 1400  
65 1.05 1400  
65 0.28 1400  
45 0.31 800  
95 0.60 1200  
55 1.15 800  
110 2.00 800  
35 0.03 1200  
90-Cold  
90-Cold  
90-Cold  
90-30  
Cottons  
Cottons  
Anti-Allergy +  
Cottons Eco  
Cottons Eco  
Easy Care  
Easy Care  
Fasion Care  
Delicates  
Bedding/Blanket  
Quick 14  
Daily/Quick  
Daily/Quick  
Daily/Quick  
Wool  
40-Cold  
40-Cold  
60-Cold  
60-Cold  
40  
30-Cold  
60-40  
2
8
8
8
2
4
4
-
30-Cold  
90-Cold  
90-Cold  
90-Cold  
40-Cold  
40-Cold  
60-Cold  
70  
Jeans  
Shirts  
*
Self Clean  
Refresh  
2
-
 
21  
EN  
• : Selectable  
* : Automatically selected, no cancelling.  
** : Energy and water labelling test programme in accordance with AS/NZS 2040.  
*** If maximum spin speed of the machine is lower then this value, you can only select  
up to the maximum spin speed.  
- : See the programme description for maximum load.  
The auxiliary functions in the table may vary according to the model of your  
C
machine.  
Water and power consumption may vary subject to the changes in water pressure,  
C
water hardness and temperature, ambient temperature, type and amount of  
laundry, selection of auxiliary functions and spin speed, and changes in electric  
voltage.  
You can see the washing time of the programme you have selected on the display  
of the machine. It is normal that small differences may occur between the time  
shown on the display and the real washing time.  
C
 
22  
EN  
F2 appears on the display when you select  
Auxiliary function selection  
Select the desired auxiliary functions before  
starting the programme. Furthermore, you  
may also select or cancel auxiliary functions  
that are suitable to the running programme  
by pressing the Start / Pause / Cancel  
button when the machine is operating. For  
this, the machine must be in a step before  
the auxiliary function you are going to  
select or cancel.  
Depending on the programme, press a, b,  
c or d buttons to select the desired auxiliary  
function. Symbol of the selected auxiliary  
function appears on the display.  
this function (b).  
When you select this function, load  
C
your machine with half of the maximum  
laundry specified in the programme  
table.  
Easy Iron  
This function creases the clothes lesser  
when they are being washed. Drum  
movement is reduced and spinning speed  
is limited to prevent creasing. In addition,  
washing is done with a higher water level.  
F4 appears on the display when you select  
this function (d).  
• Rinse Hold  
If you are not going to unload your  
clothes immediately after the programme  
completes, you may use rinse hold  
function to keep your laundry in the final  
rinsing water in order to prevent them  
from getting wrinkled when there is no  
water in the machine. Press Start / Pause  
/Cancel button after this process if you  
want to drain the water without spinning  
your laundry. Programme will resume and  
complete after draining the water.  
If you want to spin the laundry held in  
water, adjust the Spin Speed and press  
Start / Pause / Cancel button.  
a
b
c
d
Some functions cannot be selected  
together. If a second auxiliary function  
conflicting with the first one is selected  
before starting the machine, the  
function selected first will be canceled  
and the second auxiliary function  
selection will remain active. For  
example, if you want to select Quick  
Wash after you have selected the  
Prewash, Prewash will be canceled and  
Quick Wash will remain active.  
C
C
The programme resumes. Water is drained,  
laundry is spun and the programme is  
completed.  
• Pet hair removal  
This function helps to remove pet hair that  
remain on your garments more effectively.  
When you select this function, Prewash  
and Extra Rinse steps are added to the  
normal programme. Thus, washing is  
performed with more water (30%) and the  
pet hair is removed more effectively.  
An auxiliary function that is not  
compatible with the programme cannot  
be selected. (See "Programme and  
consumption table")  
CAuxiliary Function buttons may vary  
according to the model of the machine.  
• Prewash  
Never wash your pets in the washing  
machine.  
A
A Prewash is only worthwhile for heavily  
soiled laundry. Not using the Prewash will  
save energy, water, detergent and time.  
F1 appears on the display when you select  
this function (a).  
• Quick  
This function can be used in Cottons and  
Synthetics programmes. It decreases the  
washing times and also the number of  
rinsing steps for lightly soiled laundry.  
 
23  
EN  
1. Press Start / Pause / Cancel button.  
“:” sign in the middle of the delayed  
start time on the display stops flashing.  
Pause symbol appears. Delayed  
Start symbol flashes. Start symbol  
disappears.  
Time display  
Remaining time to complete the  
programme appears on the display while  
the programme is running. Tim is displayed  
as “01:30” in hours and minutes format.  
2. Set the desired delayed start time  
by pressing the Delayed Start + or -  
buttons.  
3. Press Start / Pause / Cancel button.  
Delayed Start symbol illuminates  
steadily. Pause symbol disappears.  
Start symbol appears.  
4. “:” sign in the middle of the delayed  
start time on the display starts flashing.  
Cancelling the Delayed Start function  
If you want to cancel the delayed start  
countdown and start the programme  
immediately:  
1. Press Start / Pause / Cancel button. “:”  
sign in the middle of the delayed start  
time on the display stops flashing.  
2. Start symbol disappears. Pause  
symbol and Delayed Start symbol  
flashes.  
3. Decrease the delayed start time by  
pressing the Delayed Start - button.  
Programme duration appears after 30  
minutes.  
Programme time may differ from  
C
the values in the "Programme and  
consumption table" depending on the  
water pressure, water hardness and  
temperature, ambient temperature,  
amount and the type of laundry,  
auxiliary functions selected and the  
changes at the mains voltage.  
Delayed start  
With the Delayed Start function the startup  
of the programme may be delayed up to 24  
hours. Delayed start time can be increased  
by increments of 30 minutes.  
Do not use liquid detergents when you  
set Delayed Start! There is the risk of  
staining of the clothes.  
C
1. Open the loading door, place the  
laundry and put detergent, etc.  
2. Select the washing programme,  
temperature, spin speed and, if  
4. Press Start / Pause / Cancel button to  
start the programme.  
Starting the programme  
1. Press Start / Pause / Cancel button to  
start the programme.  
required, the auxiliary functions.  
3. Set the desired delayed start time  
by pressing the Delayed Start + or -  
buttons. Delayed Start symbol flashes.  
4. Press Start / Pause / Cancel button.  
Delayed start countdown starts.  
Delayed Start symbol illuminates  
steadily. Start symbol appears. “:” sign  
in the middle of the delayed start time  
on the display starts flashing.  
2. Start symbol showing the startup of the  
programme will turn on.  
3. Loading door is locked and Door  
Locked symbol appears on the display.  
4. The symbol of the step from which the  
programme has started appears on the  
display (Prewash, Main Wash, Rinse,  
Softener and Spin).  
Additional laundry may be loaded  
C
during the delayed start period. At the  
end of the countdown, Delayed Start  
symbol disappears, washing cycle  
starts and the time of the selected  
programme appears on the display.  
Progress of programme  
Progress of a running programme is  
indicated on the display with a set of  
symbols.  
Changing the delayed start period  
If you want to change the time during  
countdown:  
Relevant symbol appears on the display  
at the beginning of each programme step  
and all symbols remain lit at the end of the  
programme. The farthermost right symbol  
indicates the current programme step.  
 
24  
EN  
Prewash  
If the Prewash auxiliary function is selected,  
Prewash symbol appears on the display  
indicating that the prewash step has  
started.  
F3  
F1  
Main Wash  
Main Wash symbol indicating that the main  
wash step has started appears on the  
display.  
Changing the speed and temperature  
settings for auxiliary functions  
Depending on the step the programme has  
reached, you may cancel or activate the  
auxiliary functions; see, "Auxiliary function  
selection".  
You may also change the speed and  
temperature settings; see, "Spin speed  
selection" and "Temperature selection".  
Adding or taking out laundry  
1. Press the Start / Pause / Cancel button  
to switch the machine to pause mode.  
The programme follow-up light of the  
relevant step during which the machine  
was switched into the pause mode will  
Rinse  
Rinse symbol indicating that the rinsing  
step has started appears on the display.  
Softener  
Softener symbol indicating that the softener  
step has started appears on the display.  
Spin  
Appears at the beginning of the final spin  
step and remains lit during Spin and Pump  
special programmes.  
If the machine does not pass to the  
C
spinning step, Rinse Hold function  
might be active or the automatic  
unbalanced load detection system  
might be activated due to the  
unbalanced distribution of the laundry  
in the machine.  
flash.  
2. Wait until the Loading Door can be  
opened.  
3. Open the Loading Door and add or  
take out the laundry.  
4. Close the Loading Door.  
5. Make changes in auxiliary functions,  
temperature and speed settings if  
necessary.  
Loading door lock  
There is a locking system on the loading  
door of the machine that prevents opening  
of the door in cases when the water level is  
unsuitable.  
6. Press Start / Pause / Cancel button to  
start the machine.  
Door Locked symbol appears when the  
loading door is locked. This symbol will  
flash until the loading door becomes ready  
to open when programme completes or  
the machine is paused. Do not force to  
open the loading door in this step. Symbol  
disappears when the door is ready to open.  
You can open the door when the symbol  
disappears.  
Changing the selections after  
programme has started  
The loading door will not open if the  
C
water temperature in the machine is  
high or the water level is above the  
door opening.  
Child Lock  
Use Child Lock function to prevent children  
from tampering with the machine. Thus  
you can avoid any changes in a running  
programme.  
You can switch on and off the machine  
C
Switching the machine to pause mode  
Press the Start / Pause / Cancel button to  
switch the machine to pause mode. Pause  
symbol appears on the display indicating  
that the machine is paused. Start symbol  
disappears.  
with On / Off button when the Child  
Lock is active. When you switch on the  
machine again, programme will resume  
from where it has stopped.  
To activate the Child Lock:  
Press and hold 2nd and 4th Auxiliary  
Function buttons for 3 seconds. “Con”  
appears on the display.  
 
25  
EN  
Machine is in Rinse Hold mode  
Spin symbol flashes and Pause symbol  
illuminates when the machine is in Rinse  
Hold mode.  
If you want to spin your laundry when the  
machine is in this mode:  
Adjust the spin speed and press Start /  
Pause / Cancel button. Pause symbol  
disappears and Start symbol appears.  
Programme resumes, discharges the  
water and spins the laundry.  
Same phrase will appear on the  
display if you press any button when  
Child Lock is enabled.  
C
To deactivate the Child Lock:  
Press and hold 2nd and 4th Auxiliary  
Function buttons for 3 seconds. “COFF”  
appears on the display.  
If you only want to drain the water without  
spinning:  
Just press Start / Pause / Cancel button.  
Pause symbol disappears. Start symbol  
appears. Programme resumes and  
discharges the water only.  
End of programme  
“End” appears on the display at the  
end of the programme. Symbols of the  
programme steps remain lit. Auxiliary  
function, spin speed and temperature  
that were selected at the beginning of the  
programme remain selected.  
Do not forget to disable the child  
C
lock at the end of the programme  
if it was enabled before. Otherwise,  
machine will not allow to select a new  
programme.  
Cancelling the programme  
Press and hold Start / Pause / Cancel  
button for 3 seconds. Start symbol  
flashes. Symbol of the step at which  
the programme was cancelled remains  
lit. "End" appears on the display and the  
programme is cancelled.  
If you want to open the loading  
C
door after you have cancelled the  
programme but it is not possible  
to open the loading door since the  
water level in the machine is above  
the loading door opening, then turn  
the Programme Selection knob  
to Pump+Spin programme and  
discharge the water in the machine.  
 
26  
EN  
6 Maintenance and cleaning  
sure that the locking tab engages.  
Cleaning the loading  
door and the drum  
Service life of the product extends and  
frequently faced problems decrease if  
cleaned at regular intervals.  
Cleaning the detergent drawer  
Clean the detergent drawer at regular  
intervals (every 4-5 washing cycles)  
as shown below in order to prevent  
accumulation of powder detergent in time.  
Residues of softener, detergent and dirt  
may accumulate in your machine in time  
and may cause unpleasant odours and  
washing complaints. To avoid this, use  
the Drum Cleaning programme. If your  
machine is not featured with Drum Cleaning  
programme, use Cottons-90 programme  
and select Additional Water or Extra Rinse  
auxiliary functions as well. Before starting  
the programme, put max. 100 g of powder  
anti-limescale into the main wash detergent  
compartment (compartment nr. II). If the  
anti-limescale is in tablet form, put only  
one tablet into compartment nr. II. Dry the  
inside of the bellow with a clean piece of  
cloth after the programme has come to an  
end.  
1. Press the dotted point on the siphon  
in the softener compartment and pull  
towards you until the compartment is  
removed from the machine.  
Repeat Drum Cleaning process in every  
C
If more than normal amount of water  
C
2 months.  
and softener mixture starts to gather in  
the softener compartment, the siphon  
must be cleaned.  
Use an anti-limescale suitable for the  
C
washing machines.  
After every washing make sure that no  
foreign substance is left in the drum.  
2. Wash the detergent drawer and the  
siphon with plenty of lukewarm water  
in a washbasin. Wear protective gloves  
or use an appropriate brush to avoid  
touching of the residues in the drawer  
with your skin when cleaning.  
3. Insert the drawer back into its place  
after cleaning and make sure that it is  
seated well.  
If your detergent drawer is the one  
indicated in the following figure:  
If the holes on the bellow shown in the  
figure is blocked, open the holes using a  
toothpick.  
Foreign metal substances in your  
C
machine will cause rust stains. Clean  
the stains on the drum surface by using  
cleaning agents for stainless steel.  
Never use steel wool or wire wool.  
Cleaning the body and  
CtLoifrtetmheovreeaitr apsaritlluosfttrhaetesdi.pAhoftner  
control panel  
performing the above mentioned  
cleaning procedures, replace the  
siphon back to its seating and push  
its front section downwards to make  
Wipe the body of the machine with soapy  
water or non-corrosive mild gel detergents  
as necessary, and dry with a soft cloth.  
 
27  
EN  
Use only a soft and damp cloth to clean  
to clean the pump filter.  
the control panel.  
In addition, prior to transporting the  
machine (eg., when moving to another  
house) and in case of freezing of the water,  
water may have to be drained completely.  
Never use sponge or scrub materials.  
These will damage the painted and  
plastic surfaces.  
A
Foreign substances left in the pump  
filter may damage your machine or may  
cause noise problem.  
A
Cleaning the water intake filters  
There is a filter at the end of each water  
intake valve at the rear of the machine  
and also at the end of each water intake  
hose where they are connected to the tap.  
These filters prevent foreign substances  
and dirt in the water to enter the washing  
machine. Filters should be cleaned as they  
do get dirty.  
In order to clean the dirty filter and  
discharge the water:  
1. Unplug the machine to cut off the  
supply power.  
Temperature of the water inside the  
A
machine may rise up to 90 ºC. To avoid  
burning risk, filter must be cleaned after  
the water in the machine cools down.  
2. Open the filter cap.  
If the filter cap is composed of two  
pieces, press the tab on the filter cap  
downwards and pull the piece out  
towards yourself.  
1. Close the taps.  
2. Remove the nuts of the water intake  
hoses to access the filters on the water  
intake valves. Clean them with an  
appropriate brush. If the filters are too  
dirty, take them out by means of pliers  
and clean them.  
If the filter cap is one piece, pull the cap  
from both sides at the top to open.  
3. Take out the filters on the flat ends of  
the water intake hoses together with  
the gaskets and clean thoroughly under  
running water.  
4. Replace the gaskets and filters carefully  
in their places and tighten the hose  
nuts by hand.  
Draining remaining water and  
You can remove the filter cover by  
C
cleaning the pump filter  
slightly pushing downwards with a thin  
plastic tipped tool, through the gap  
above the filter cover. Do not use metal  
tipped tools to remove the cover.  
3. Some of our products have emergency  
draining hose and some does not have.  
Follow the steps below to discharge  
the water.  
The filter system in your machine prevents  
solid items such as buttons, coins and  
fabric fibers clogging the pump impeller  
during discharge of washing water. Thus,  
the water will be discharged without any  
problem and the service life of the pump  
will extend.  
If the machine fails to drain water, the  
pump filter is clogged. Filter must be  
cleaned whenever it is clogged or in every  
3 months. Water must be drained off first  
Discharging the water when the product  
has an emergency draining hose:  
 
28  
EN  
while installing it into its housing. Seat  
the filter into its place completely.  
Otherwise, water may leak from the  
filter cap.  
6. If the filter cap is composed of two  
pieces, close the filter cap by pressing  
on the tab. If it is one piece, seat the  
tabs in the lower part into their places  
first, and then press the upper part to  
close.  
a. Pull the emergency draining hose out  
from its seat  
b. Place a large container at the end  
of the hose. Drain the water into the  
container by pulling out the plug at the  
end of the hose. When the container  
is full, block the inlet of the hose by  
replacing the plug. After the container  
is emptied, repeat the above procedure  
to drain the water in the machine  
completely.  
c. When draining of water is finished,  
close the end by the plug again and fix  
the hose in its place.  
d. Turn the pump filter to take it out.  
Discharging the water when the product  
does not have an emergency draining  
hose:  
a. Place a large container in front of the  
filter to catch water from the filter.  
b. Loosen pump filter (anticlockwise) until  
water starts to flow. Fill the flowing  
water into the container you have  
placed in front of the filter. Always keep  
a piece of cloth handy to absorb any  
spilled water.  
c. When the water inside the machine is  
finished, take out the filter completely  
by turning it.  
4. Clean any residues inside the filter as  
well as fibers, if any, around the pump  
impeller region.  
5. Install the filter.  
If your product has a water jet feature,  
be sure to fit the filter into its housing  
in the pump. Never force the filter  
A
 
29  
EN  
7 Troubleshooting  
Programme cannot be started or selected.  
Washing machine has switched to self protection mode due to a supply problem  
(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel  
button for 3 seconds to reset the machine to factory settings. (See "Canceling the  
programme")  
Water in the machine.  
Some water might have remained in the product due to the quality control  
processes in the production. >>> This is not a failure; water is not harmful to the  
machine.  
There is water leaking from the bottom of the washing machine.  
Likely problems with hoses or the pump filter. >>> Be sure the seals of the water  
inlet hoses are securely fitted. Attach the hose to the tap tightly.  
Pump filter might not be closed fully. >>> Make sure that the pump filter is  
completely closed.  
Machine does not fill with water.  
Tap is turned off. >>> Open the inlet water taps fully.  
Water inlet hose is bent. >>> Flatten the water inlet hose.  
Water inlet filter is clogged. >>> Clean the water inlet filter.  
The loading door is ajar. >>> Close the Loading Door.  
Machine does not drain water.  
Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.  
Pump filter is clogged. >>> Clean the pump filter.  
Machine vibrates or makes noise.  
Machine might be standing unbalanced. >>> Adjust the feet to level the machine.  
A hard substance might have entered into the pump filter. >>> Clean the pump  
filter.  
Transportation safety bolts are not removed. >>> Remove the transportation  
safety bolts.  
Laundry quantity in the machine might be too little. >>> Add more laundry to the  
machine.  
Machine might be overloaded with laundry. >>> Take out some of the laundry  
from the machine or distribute the load by hand to balance it homogenously in the  
machine.  
Machine might be leaning on a rigid item. >>> Make sure that the machine is not  
leaning on anything.  
Machine stopped shortly after the programme started.  
Machine might have stopped temporarily due to low voltage. >>> It will resume  
running when the voltage restores to the normal level.  
Machine directly discharges the water it takes in.  
Draining hose might not be at adequate height. >>> Connect the water draining  
hose as described in the operation manual.  
No water can be seen in the machine during washing.  
The water level is not visible from outside of the washing machine. This is not a  
failure.  
C
 
30  
EN  
Loading door cannot be opened.  
Door lock is activated because of the water level in the machine. >>> Drain the  
water by running the Pump or Spin programme.  
Machine is heating up the water or it is at the spinning cycle. >>> Wait until the  
programme completes.  
Child lock is engaged. Door lock will be deactivated a couple of minutes after  
the programme has come to an end. >>> Wait for a couple of minutes for  
deactivation of the door lock.  
Washing takes longer time than the one specified in the manual.  
Water pressure is low. >>> Machine waits until taking in adequate amount of  
water to prevent poor washing quality due to the decreased amount of water.  
Therefore, the washing time extends.  
Voltage might be low. >>> Washing time is prolonged to avoid poor washing  
results when the supply voltage is low.  
Input temperature of water might be low. >>> Required time to heat up the water  
extends in cold seasons. Also, washing time can be lengthened to avoid poor  
washing results.  
Number of rinses and/or amount of rinse water might have increased. >>>  
Machine increases the amount of rinse water when good rinsing is needed and  
adds an extra rinsing step if necessary.  
Excessive foam might have occurred and automatic foam absorption system  
might have been activated due to too much detergent usage. >>> Use  
recommended amount of detergent.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
Programme time does not countdown. (On models with display)  
Timer may stop during water intake. >>> Timer indicator will not countdown until  
the machine takes in adequate amount of water. The machine will wait until there  
is sufficient amount of water to avoid poor washing results due to lack of water.  
Timer indicator will resume countdown after this.  
Timer may stop during heating step. >>> Timer indicator will not countdown until  
the machine reaches the selected temperature.  
Timer may stop during spinning step. >>> Automatic unbalanced load detection  
system might be activated due to the unbalanced distribution of the laundry in the  
drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
Programme time does not countdown.  
There might be an imbalance of laundry in the machine. >>> Automatic  
unbalanced load detection system might be activated due to the unbalanced  
distribution of the laundry in the drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
 
31  
EN  
Machine does not switch to spinning step.  
There might be an imbalance of laundry in the machine. >>> Automatic  
unbalanced load detection system might be activated due to the unbalanced  
distribution of the laundry in the drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
The machine will not spin if water is not drained completely. >>> Check the filter  
and the draining hose.  
Excessive foam might have occurred and automatic foam absorption system  
might have been activated due to too much detergent usage. >>> Use  
recommended amount of detergent.  
C
Washing performance is poor: Laundry turns gray.  
Insufficient amount of detergent was used over a long period of time. >>> Use  
the recommended amount of detergent appropriate for water hardness and the  
laundry.  
Washing was made at low temperatures for a long time over a long period of time.  
>>> Select the proper temperature for the laundry to be washed.  
Insufficient amount of detergent is used with hard waters. >>> Using insufficient  
amount of detergent with hard water causes the soil to stick on the cloth and this  
turns the cloth into gray in time. It is difficult to eliminate graying once it happens.  
Use the recommended amount of detergent appropriate for water hardness and  
the laundry.  
Too much detergent is used. >>> Use the recommended amount of detergent  
appropriate for water hardness and the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Stains persist or the laundry is not whitened.  
Insufficient amount of detergent is used. >>> Use recommended amount of  
detergent appropriate for the laundry.  
Excessive laundry was loaded in. >>> Do not load the machine in excess. Load  
with amounts recommended in the "Programme and consumption table".  
Wrong programme and temperature were selected. >>> Select the proper  
programme and temperature for the laundry to be washed.  
Wrong type of detergent is used. >>> Use original detergent appropriate for the  
machine.  
Detergent is put in the wrong compartment. >>> Put the detergent in the correct  
compartment. Do not mix the bleaching agent and the detergent with each other.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Oily stains appeared on the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Clothes smell unpleasantly.  
Odours and bacteria layers are formed on the drum as a result of continuous  
washing at lower temperatures and/or in short programmes. >>> Leave the  
detergent drawer as well as the loading door of the machine ajar after each  
washing. Thus, a humid environment favorable for bacteria cannot occur in the  
machine.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
32  
EN  
Colour of the clothes faded.  
Excessive laundry was loaded in. >>> Do not load the machine in excess.  
Detergent in use is damp. >>> Keep detergents closed in an environment free of  
humidity and do not expose them to excessive temperatures.  
A higher temperature is selected. >>> Select the proper programme and  
temperature according to the type and soiling degree of the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
It does not rinse well.  
The amount, brand and storage conditions of the detergent used are  
inappropriate. >>> Use a detergent appropriate for the washing machine and  
your laundry. Keep detergents closed in an environment free of humidity and do  
not expose them to excessive temperatures.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Put the detergent in the correct  
compartment.  
Pump filter is clogged. >>> Check the filter.  
Drain hose is folded. >>> Check the drain hose.  
Laundry became stiff after washing.  
Insufficient amount of detergent is used. >>> Using insufficient amount of  
detergent for the water hardness can cause the laundry to become stiff in time.  
Use appropriate amount of detergent according to the water hardness.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Put the detergent in the correct  
compartment.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Laundry does not smell like the softener.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Wash and clean the dispenser with  
hot water. Put the detergent in the correct compartment.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
33  
EN  
Detergent residue in the detergent drawer.  
Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in  
detergent.  
Detergent has gotten damp. >>> Keep detergents closed in an environment free  
of humidity and do not expose them to excessive temperatures.  
Water pressure is low. >>> Check the water pressure.  
The detergent in the main wash compartment got wet while taking in the prewash  
water. Holes of the detergent compartment are blocked. >>> Check the holes  
and clean if they are clogged.  
There is a problem with the detergent drawer valves. >>> Call the Authorized  
Service Agent.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
There is detergent left on the laundry.  
Excessive laundry was loaded in. >>> Do not load the machine in excess.  
Wrong programme and temperature were selected. >>> Select the proper  
programme and temperature for the laundry to be washed.  
Wrong detergent was used. >>> Select the proper detergent for the laundry to be  
washed.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Too much foam forms in the machine.  
Improper detergents for the washing machine are being used. >>> Use  
detergents appropriate for the washing machine.  
Excessive amount of detergent is used. >>> Use only sufficient amount of  
detergent.  
Detergent was stored under improper conditions. >>> Store detergent in a closed  
and dry location. Do not store in excessively hot places.  
Some meshed laundry such as tulle may foam too much because of their texture.  
>>> Use smaller amounts of detergent for this type of item.  
Detergent is put in the wrong compartment. >>> Put the detergent in the correct  
compartment.  
Softener is being taken early. >>> There may be problem in the valves or in the  
detergent dispenser. Call the Authorized Service Agent.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
34  
EN  
Machine does not start. Nothing appears on the display.  
Machine may be unplugged. >>> Check the plug and attach it to the socket.  
Fuse may be defective. >>> Check household fuse/Circuit Breaker/Earth Leakage  
Power may be out. >>> Check if there is any power outage.  
On / Off button might not be pressed. >>> Press On / Off button.  
Machine does not start when Start / Pause / Cancel button is pressed after selecting  
the programme.  
Loading door may be open. >>> Close the loading door.  
Rinse symbol flashes in the display. (No Water symbol may also be lit depending on  
the model of your machine).  
Water may be cut off. >>> Make sure that the water is not cut off and press Start /  
Pause / Cancel button again to start your machine.  
Foam is overflowing from the detergent drawer.  
Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and  
pour into the main wash compartment of the detergent drawer.  
Put detergent into the machine suitable for the programmes and maximum loads  
indicated in the “Programme and consumption table”. When you use additional  
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.  
C
Laundry remains wet at the end of the programme  
Excessive foam might have occurred and automatic foam absorption system might  
have been activated due to too much detergent usage. >>> Use recommended  
amount of detergent.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
If you cannot eliminate the problem although you follow the instructions in this section,  
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional  
product yourself.  
A
35  
EN  
 
 

Black Decker Hot Beverage Maker JKC650KT User Manual
Black Decker Power Screwdriver 90530144 User Manual
Black Decker Vacuum Cleaner FHV1080 User Manual
Bose Home Theater Server CC 4 User Manual
Breville Kitchen Grill SG620XL User Manual
Bushnell Digital Camera 11 0013Y User Manual
Canon Fax Machine L900 User Manual
Casio Musical Instrument WK3200 User Manual
CDA Freezer FW281 User Manual
Chief Manufacturing TV Mount MSP DCCMD User Manual