Beko Washer WMA 510 S User Manual

installation & operating Automatic  
instructions and washing guidance washing machine  
WMA 510 S  
WMA 510 W  
a
 
Due to the quality control processes applied to your machine  
during production, there may be some water left in your  
machine. This does not cause any damage.  
Note that temperatures in this book are for guidance only. Always  
check the clothing labels before selecting your wash programme.  
Recycling: This product bears the selective sorting symbol  
for waste electrical and electronic equipment (WEEE). This  
means that this product must be handled pursuant to  
European Directive 2002/96/EC in order to be recycled or  
dismantled to minimize its impact on the environment. For  
further information, please contact your local or regional authorities.  
Electronic products not included in the selective sorting process are  
potentially dangerous for the environment and human health due  
to the presence of hazardous substances.  
 
contents  
Introduction  
Welcome  
2
Installation  
Know your washing machine/specification  
4
5
5
7
Location  
Installation  
Electrical connection  
Operating  
How to use  
8
Programme descriptions  
Function buttons  
12-13  
13  
13  
ITCL fabric care symbols  
Machine care  
Care & maintenance  
Before calling service/troubleshooting  
Guarantee  
14  
16  
17  
17  
Service  
3
 
know your washing machine  
Top lid  
90°  
60°  
60°  
Start  
/
Cancel  
Pause  
Rins  
e
Extra  
Rins  
Cottons  
Cold  
40°  
Prewash  
H
o
ld  
e
40°  
Synthetics  
30°  
On/Off  
Cold  
A
Class 40°  
Delicates 30°  
Mini 30’  
Hand Wash  
Rinse  
Cold  
Woollens  
40°  
Ready Wash Spin/End  
Spin+Drai  
n
Front Door  
Handle  
Pump filter cover  
Kick plate  
Adjustable feet  
Programme  
Selection  
knob  
Auxillary  
Function  
buttons  
Start/Pause/Cancel  
button  
90°  
60°  
60°  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Cottons  
40°  
Prewash  
40°  
Synthetics  
30°  
Cold  
On/Off  
Cold  
A Class40°  
Delicates 30°  
Mini 30’  
Hand Wash  
Rinse  
Cold  
Woollens  
40°  
Ready  
Wash Spin/End  
Spin+Drain  
Program progress  
indicator lights  
On/Off  
button  
Detergent and softener drawer  
specification  
Capacity (dry fabric)  
5kg  
Dimensions width x depth x height  
Because we continually strive to improve  
our products, we may change our specifications  
and designs without prior notice.  
60cm x 54cm x 85cm  
62kg  
Net weight  
Supply voltage  
Nominal current  
Motor power  
230V~ 50Hz  
10A  
300 watts  
2050 watts  
52 rpm  
Heater power  
Washing speed  
Spin speed (max.)  
1000 rpm  
4
 
location  
You can locate the washing machine  
In addition to this, washing machines should  
not be installed on carpet, foam backed  
laminate, or parquet flooring where the nature  
of these types of flooring can also contribute  
to the inefficient operation of the washing  
machine on the spin cycle.  
anywhere (except bathrooms, showers and  
away from rain, damp places and water) as  
long as you have a cold water supply, drainage  
and electrical connection alongside.  
Ensure there is clearance each side of the  
machine to allow slight side ways movement  
during washing and spin drying.  
Attention!  
Never place your machine on a carpet. This  
prevents air circulation. The electrical  
components of the machine may overheat and  
may cause damage.  
Please ensure the power, water supplies  
and waste are suitable, if in doubt, consult a  
qualified plumber or electrician.  
Different methods of floor construction can  
result in an increase in vibration/noise during  
spin modes.  
If these symptoms are experienced please  
ensure firstly that all four feet are in firm contact  
with the floor to minimise any out of balance  
vibration which may be generated.  
Additional information is available by  
request.  
installation  
C
P
C
Attention! Keep the safety bolts for future  
transportation and reinstate them before  
transporting your machine. Never transport  
your machine without the transport bolts in  
position. Any resultant damage is not covered  
by the warranty.  
Removing transport safety bolts  
The transport safety bolts must be removed  
before any operation of the machine.  
1 Turn the bolt heads C anti-clockwise until  
the bolt can be partially withdrawn.  
2 Remove them and the rubber bushes by  
pulling outwards. An up/down action and  
a small squirt of washing up liquid will ease  
removal.  
3 Plastic plugs, supplied inside the protective  
bag, designated P, should be placed in the  
safety bolt holes as shown.  
5
 
Feet adjustment  
To ensure quiet and stable operation, the  
machine should be positioned correctly and  
leveled. If the machine is unstable, adjust feet  
by loosening the plastic lock nut and screwing  
or unscrewing the feet until the machine is  
level. After positioning, tighten the lock nut.  
5
90°  
60°  
60°  
Start ause  
Cancel  
/
P
Coton  
40°  
s
Rinse  
Hold  
Extra  
Rinse  
40°  
Prewash  
Sy  
n
h
t
eitcs  
30°  
Cold  
On/Off  
Cold  
A
Cla  
s
40°  
Delicates 30°  
Mini30  
HandWash  
Cold  
Woolens  
40°  
Ready  
W
a
s
h
S
p
i
/
E
n
d
Rinse  
Sp in+ Drain  
Water inlet connection  
Your machine comes with cold water  
connection only.  
Connect the cold water using the hose with  
blue printing or colour.  
Cold water supply  
For proper operation, the pressure of cold  
water should be between 1 and 10 bars. (1  
bar corresponds to more  
Drain hose  
than 8 litres per minute  
flow rate with a fully open  
tap.)  
The drain hose should be placed and secured  
either at the side of the sink A, directly to the  
drain B or directly to the waste water  
inlet C.  
To prevent water leaks,  
sealing washers are  
The hose should not be bent.  
supplied with the water inlet hose inside the  
machine. Place these on the hose end and  
tighten both ends fully.  
Using method A, the drain hose should be  
secured with the elbow so that it can not  
be dislodged.  
In order to prevent any water leakage and  
damage, turn off the water tap when not in  
use. Connect the right angled end of the hose  
to the machine water inlet.  
The waste pipe must only be connected  
into the foul drains and not surface water  
drainage system.  
The hose should be placed between 20 and  
80cm from the floor level and must not be  
extended otherwise the machine may not  
empty the waste water.  
The washing machine must only be  
connected with the new hose provided and  
old hoses must not be reused.  
The minimum diameter of any external pipe  
must be 32 mm.  
6
 
electrical connection  
Make sure that you have an earthed power  
outlet socket rated at 13 amps (minimum).  
Attention!  
Important  
Fitting a different plug  
As the colours of the wires in the mains  
lead of this appliance may not correspond with  
the coloured markings identifying the terminals  
on your plug, proceed as follows:  
If you use your machine as built-in, the  
socket must be reachable after installation, or  
a separate switch (which can disconnect the  
two poles) must be used in the installation.  
1 Connect the green - yellow or green (earth)  
wire to the terminal in the plug marked ‘E’  
or with the symbol or coloured green  
and yellow or green.  
Electrical requirements  
2 Connect the blue (neutral) wire to the  
terminal in the plug marked ‘N’ or coloured  
black.  
Before you insert the plug into the wall  
socket make sure that the voltage and the  
frequency shown in the rating label corresponds  
to your electricity supply.  
3 Connect the brown (live) wire to the terminal  
in the plug marked ‘L’ or coloured red.  
With the alternative plugs a 13A fuse must  
be fitted either in the plug or adaptor or in the  
main fuse box. If in doubt contact a qualified  
electrician.  
We recommend that this appliance be  
connected to the mains supply via a suitable  
switched and fused socket in a readily accessible  
position.  
Should the mains lead of the appliance  
become damaged or need replacing at any  
time, it must be replaced by a special purpose  
made mains lead which can only be obtained  
from a Beko Authorised Service Agent.  
Green and yellow  
or green  
Warning  
This appliance must be earthed  
If the fitted moulded plug is not suitable for  
your socket, then the plug should be cut off  
and an appropriate plug fitted.  
The moulded plug on this appliance  
incorporates a 13A fuse. Should the fuse need  
to be replaced an ASTA approved BS1362 fuse  
of the same rating must be used. Do not forget  
to refit the fuse cover. In the event of losing  
the fuse cover, the plug must not be used until  
a replacement fuse cover has been fitted.  
Colour of the replacement fuse cover must be  
the same colour as that visible on the pin face  
of the plug. Fuse covers are available from any  
good electrical store.  
N
Blue or  
L
Brown or red  
black  
In order to avoid hazards, damaged supply  
cord should be replaced by the manufacturer,  
its service agent or similarly qualified people.  
7
 
how to use  
Sorting laundry  
Sort the laundry according to the following  
groups and wash them separately:  
Programme selection  
Select the programme after referring to the  
programme descriptions and table on  
page 12-13.  
White and colour fast fabrics  
Non-fast, coloured fabrics  
Delicate fabrics (silk, rayon etc.)  
Woollens  
Warning! Always switch on the machine  
before selecting your wash programme.  
Turn the programme selection knob to the  
desired programme. You have now selected  
both the washing programme and the  
washing temperature at the same time.  
Hand knits should be placed inside out in  
the machine.  
Be sure to empty pockets and remove any  
belts, buckles, pins, etc. from the clothing.  
Never exceed the maximum load of the selected  
programme (see page 13)  
Programme selection indicator  
90°  
60°  
60°  
Cottons  
Cod  
40°  
40°  
Synthetics  
30°  
Cold  
0°  
Delica
Spin+Dra
Loading the machine  
Make sure power button is off.  
1 Pull the door handle.  
Function selection  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
2 Place the fabrics uniformly inside the  
machine. Make sure that there is no clothing  
obstructing the door.  
3 Close the door by pushing lightly.  
If the door does not close completely, the  
machine will not start. This is a safety  
precaution. The front door is locked until  
the end of the washing programme and it  
cannot be opened for about 2 minutes  
following the end of the programme.  
Ready  
Wash Spin/End  
Select the desired auxiliary function such as  
Rinse Hold, Extra Rinse, etc. before you push  
the “Start/Pause/Cancel” button. Indicator light  
of the function selected will be on. Door will  
be locked after pressing “Start/Pause/Cancel”  
button.  
To cancel the selected function, press  
“Start/Pause/Cancel” button. Your machine  
will pause. Any auxiliary function button can  
be selected now if needed, see page 13.  
You have to start the programme by repressing  
the “Start/Pause/Cancel”.  
8
 
Detergent and softener dispenser  
1 Open the drawer.  
Starting  
2 Put powder detergent and the fabric  
softener in the compartments as shown.  
3 Close the detergent and softener drawer.  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
On/Off  
Ready  
Wash Spin/End  
Syphon  
for fabric softener  
Detergent compartment I  
for prewash cycle  
Detergent compartment II  
for wash cycle  
Attention!  
Before any operation of the machine check  
the following:  
Have you closed the door?  
The tap open?  
Is the drain hose placed and secured  
properly?  
Is power connected?  
When you press the On/Off button, your  
machine is ready to select the desired  
programme. To switch the machine off, repress  
the On/Off button.  
Washing can only start when the  
“Start/Pause/Cancel” button is pressed.  
Powders and liquids  
The performance of the washing machine  
depends on the effectiveness of the detergent.  
Stains can remain if low quality detergents are  
used.  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
Only use powders specific for automatic  
washers, otherwise over foaming and poor  
washing performance will be experienced.  
Do not use liquid detergent in your detergent  
drawer. Only use liquid detergents with a  
dosing ball.  
Ready  
Wash Spin/End  
Do not attempt to use detergents and  
bleaching agents that contain chlorine and  
sulphur.  
Attention!  
Pressing the On/Off button does not mean  
that the washing operation will start! To start  
the washing, press the Start/Cancel/Pause  
button!  
Concentrated softener may clog the syphon,  
in this case add some water to the softener  
liquid.  
Amounts  
Follow the manufacturer’s recommended  
amount of detergent given on the packaging.  
Adjust the amount according to the dirt  
level, the amount of fabric and the softness of  
the water. For example, if a small amount of  
clothing is washed, put in half the amount of  
detergent normally required.  
Do not fill the fabric softener above the max  
mark as any excess amount will mix into  
the wash water and you will have to re-fill  
the compartment.  
9
 
Programme Follower  
Child Lock  
The relevant lamp on the program follow-  
up indicator lights up according to the selected  
program after the machine starts operating.  
Light of the completed step goes out and the  
next relevant step lights up. When the “On/Off”  
button is pressed, lamp of the Ready lights up.  
The “Wash” light on the program follow-up  
indicator lights up when Start/Pause/Cancel  
button is pressed after selecting the washing  
program.  
To prevent operation by children you may  
activate child lock while the machine is in  
operation.In order to activate the child lock,  
press Prewash and Rinse Hold function keys  
simultaneously for 3 seconds after the washing  
programe has started. The prewash indicator  
light will flash continously.  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
“Spin/End” indicator will light up when the  
program comes to an end. For your safety,  
your machine will not let you open the door  
for 1 minute after the program is finished. The  
“Spin/End” light will start flashing. After the  
door lock is deactivated, the “Ready” and  
“Spin/End” indicators will light up. You may  
now open door.  
y  
W
You can put your machine to “Pause” mode  
when the machine is working by pressing the  
Start/Pause/Cancel button. “Start/Pause/Cancel”  
button will light up. Some alterations in program  
settings may be made in the Pause mode (See,  
Changing a Program) and if “Pause” mode is  
entered in an appropriate step of the program,  
adding laundry function may be used (See,  
Laundry adding feature).Allow 2 minutes for  
the door lock to be deactivated.  
Only the on/off button can be used when  
child lock option is selected.  
To start a new program after the program  
is over or to adjust the program, child lock  
should be deactivated. The child lock will be  
deactivated when the same keys are pressed  
together for 3 seconds and the Prewash  
indicator light will go out.  
Press “Start/Pause/Cancel” button again to  
return to the “Wash” mode from “Pause”  
mode.The “Start/Pause/Cancel” button will  
light up continuously and the machine will  
resume operating from the step it was paused.  
Programme operation  
During the machine’s operation, the indicator  
lights on the programme follower will light up  
as each stage is reached.  
Softener is added in the softener  
compartment, it will be used in the last rinse  
cycle.  
If rinse hold is selected, you have to press  
“Start/Pause/Cancel” button, to let the  
programme continue.  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
On/  
Ready  
Wash Spin/End  
10  
 
Adding Laundry  
Programme Cancelling  
When loading laundry, make sure the  
garments are unfolded and are loosely placed  
in the drum. Place your knitted garments into  
the machine inside out. Ensure that no clothes  
are trapped between the door and the rubber  
bellow when closing the door. Push the door  
to close. Washing process will not start unless  
the door is closed.  
You can select a new program and start  
washing.To cancel a programme before it starts  
to wash press “Start/Pause/Cancel” key for 3  
seconds. “Start/Pause/Cancel” and the other  
indicator lights will be off .  
If the programme has started and you want  
to cancel it, press Start/Pause button for 3  
seconds. The programme will move to the  
“spin” step and related indicator on the  
programme follower will be on. Machine will  
start to pump for draining and the door can  
be opened after a short period of time.  
Re-Selection / Cancellation of  
Functions After Operation Start  
In order to change auxiliary functions, push  
the Start/Pause/Cancel button for a short time  
to pause the program. Change the auxiliary  
functions allowed by the selected program.  
Press the Start/Pause/Cancel button for a short  
time to continue the program.  
Start / Pause  
Cancel  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
Ready  
Wash Spin/End  
End of the programme  
When the program ends “ Spin/End”  
indicator light will come on.The door can then  
be opened after about 2 minutes and machine  
is ready for next washing load. Press “On/Off”  
to turn machine off.  
Unloading  
The machine stops automatically after  
programmes have been completed.  
1 In about 2 min, the door will unlock. Open  
the door.  
2 Press the On/Off button to switch off the  
machine.  
3 Unload the machine and leave the door open.  
Check to see if there is any water left in the  
door gasket. If so, remove with a soft cloth.  
11  
 
programme descriptions  
Cottons  
Woollens  
Cotton90,Cotton60,Cotton40,Cottoncold,A Class 40  
Programmes  
Woollen 40, Woollen cold, Handwash Programmes  
Woollen 40  
Woollen programme (main wash, 3 rinses,  
1 intermediate spin, final spin).The set temperature is 40°C  
for this programme.  
These programmes are used for white and coloured  
cotton and linen fabrics.  
Woollen Cold Woollen programme (main wash, 3 rinses,  
1 intermediate spin, final spin).  
Cotton 90  
Programme with main wash (main wash, 3  
rinses, 3 intermediate spin, final spin). The set temperature  
is 90°C for this programme.  
Handwash 30 Special programme for hand wash marked  
wool and silk. (main wash, 2 rinses, no intermediate spin,  
final spin). The set temperature is 30°C.  
Cotton 60 A class 60° Programme with main wash  
(main wash, 3 rinses, 3 intermediate spin, final spin).The  
set temperature is 60°C for this programme.  
Mini 30 Short programme (main wash, 2 rinses, no  
intermediate spin, final spin). The set temperature is 30°C.  
Cotton 40  
(main wash, 3 rinses, 3 intermediate spin, final spin).The  
set temperature is 40°C for this programme.  
Programme with main wash  
Cotton Cold  
Programme with main wash  
(main wash, 3 rinses, 3 intermediate spin, final spin).The  
set temperature is 40°C for this programme.  
A Class 40  
A Class 40° energy and washing efficiency  
(main wash, 3 rinses, 3 intermediate spin, final spin). The  
set temperature is 40°C for this programme.  
Synthetics  
Synthetics 60, Synthetics 40, Synthetics 30, Synthetics  
Cold, Delicate 30 Programmes  
These programmes are designed for synthetic fabrics,  
nylon clothing, curtains and non iron wool fabrics. The  
clothing is washed gently with more water.  
Synthetics 60 Normal programme for synthetics (mainwash,  
3 rinses, 3 intermediate spin, final spin). The set temperature  
is 60°C for this programme.  
Synthetics 40 Normal programme for synthetics (main  
wash, 3 rinses, 3 intermediate spin, final spin). The set  
temperature is 40°C for this programme.  
Synthetics 30 Normal programme for synthetics (main  
wash, 3 rinses, 3 intermediate spin, final spin). The set  
temperature is 30°C for this programme.  
Synthetics Cold Normal programme for synthetics (main  
wash, 3 rinses, 3 intermediate spin, final spin).  
Delicate 30 Delicate programme. (main wash, no  
intermediate spin, 3 rinses, final spin) The set temperature  
is 30°C for this programme.  
12  
 
Water  
Consumption Consumption  
Program  
Duration  
(min.)  
Energy  
Max  
Load  
(kg)  
Rinse  
Hold  
Extra  
Rinse  
Prewash  
Program  
(lt)  
Type of laundry  
(kWh)  
1.70  
Heavy soiled light Durable fabrics made  
of cotton and linen  
155  
140  
150  
110  
180  
120  
125  
110  
100  
85  
45  
5
5
Cottons 90  
Cottons 60*  
Normal soiled light cotton and linen  
durable to heat  
49  
45  
45  
45  
55  
55  
55  
55  
60  
60  
60  
50  
40  
15  
_
0.95  
0.65  
0.35  
0.65  
0.90  
0.55  
0.35  
0.20  
0.40  
0.04  
0,40  
0.21  
0.16  
0.04  
0.03  
Less soiled light cotton and linen sensitive  
to heat  
5
Cottons 40  
Less soiled light cotton and linen sensitive  
to heat  
Cottons Cold  
5
Heavy soiled light Durable fabrics made of  
cotton and linen (baby clothes etc.)  
A Class 40  
5
Normal soiled light cotton/synthetic  
blended durable to heat  
Synthetics 60  
2.5  
2.5  
2.5  
2.5  
2
Less soiled light cotton/synthetic blended  
durable to heat  
Synthetics 40  
Synthetics 30  
Synthetics Cold  
Delicates 30  
Woollens Cold  
Woollens 40  
Handwash 30  
Mini 30  
Very Less soiled light or cotton/synthetic  
blended sensitive to heat  
Very Less soiled light or cotton/synthetic  
blended sensitive to heat  
Delicate, sensitive synthetic, cotton  
blended  
Woollen and delicate laundry with  
machine wash sign  
70  
1.5  
1.5  
1
Woollen and delicate blended with  
machine wash label  
75  
Special program for silk, cashmere or  
laundry with no machine wash sign  
55  
Special program for slightly soiled and little  
amounts of laundry  
30  
2.5  
5
Rinse  
23  
Rinse Program  
Spin+Drain  
14  
Spin and Pump Program  
5
function buttons  
Prewash  
cotton/synthetics/delicates and wool programmes."  
A pre-wash is only worth while with heavily soiled  
laundry. Without prewash you save energy, water,  
washing powder and time.  
Extra rinse  
Using this function, you can have 4 rinse cycles instead  
of 3. The additional rinse will extract more detergent  
for sensitive skin.  
Rinse hold  
"Using this function, you can leave your clothes  
in the water as long as required at the softener  
step. When you want to finish the washing cycle,  
select the spin speed first which is suitable for the  
clothing , and then press the "start/pause/cancel"  
button. The cycle will proceed with a spin phase  
and end. You can use this function only on  
ITCL fabric care symbols  
Descriptions of the international textile care label (ITCL) symbols.  
A
60°  
P
Washing  
temperature  
Do not use  
bleach  
No spin  
Bleach can  
be used  
Chemicals can  
be used  
Do not wash  
Dry clean  
Do not  
machine  
wash  
Dry on  
horizontal  
surface  
No dry  
cleaning  
Iron permitted  
Can be washed in Do not wash in  
centrifugal centrifugal  
machine machine  
Line dry  
Do not iron  
Warm iron  
13  
 
care and maintenance  
Detergent dispenser  
It is necessary to remove the detergent  
dispenser drawer from time to time to clean  
away residue and ensure correct operation.  
To remove  
Pull out the drawer and press down on the  
coloured insert to release it fully from its  
housing. Wash the drawer in warm water to  
remove detergent and softener residue and  
before replacing wipe it dry.  
Syphon  
The syphon (coloured insert in the dispenser)  
must be cleaned. Remove the dispenser drawer  
and lift out the syphon and wash in warm  
water to remove any softener residue. Refit  
ensuring that the syphon is correctly fitted  
before use.  
Maintenance wash  
If you regularly use low temperature  
programs, for example 40˚C, certain detergents  
cause build up of greasy deposits over time.  
We recommend a hot maintenance wash once  
every 6 months to clear such accumulation of  
residue.  
Simply run the wash programme “Cotton  
90” without laundry using the usual amount  
of detergent.  
Water intake filter  
At the end of the water intake connection  
and water inlet hose-tap side there are filters.  
These filters prevent any dirt and objects  
passing into the machine. It is advisable that  
these filters should be cleaned every 30-40  
washes. To clean these filters, first turn the tap  
off. Then, disconnect the hose and clean the  
filter with a thin brush. If the filter is very dirty,  
you may clean it by pulling out with pliers. To  
clean the filter at the tap side of the hose, pull  
it out by hand and clean the filter under tap  
water. Ensure that the sealing rings are in place  
before reassembly.  
14  
 
Pump filter warning  
When the appliance is in use and depending  
on the programme selected there can be hot  
water in the filter. Never remove the filter  
during a wash cycle, always wait until the  
appliance has finished the cycle, and is empty.  
When replacing the filter, ensure it is securely  
retightened so as to stop leaks and young  
children being able to remove it.  
Hoses  
To prevent any leakage, check the hoses  
every two years. If the machine is placed in  
cold ambient temperatures, the water  
remaining inside the pump and hoses should  
be drained to prevent freezing, empty the  
water intake hoses by disconnecting from taps.  
Drum  
Do not leave any metal objects (pins, needles,  
etc.) inside the drum. These objects may cause  
rust on the drum surface and stain clothing.  
Do not clean the drum with abrasive materials.  
Cleaning the pump filter  
Warning  
Hot water danger! Always ensure that the  
drum is completely empty. Be careful while  
taking out the filter!  
Switch off the appliance. Open the filter  
cover by pulling at the holder as shown.  
Open the filter as shown turning the cap  
anti-clockwise, drain the water. If there are any  
foreign parts inside the filter, take them out  
and clean the filter before replacing it. Then,  
place the filter while turning it clockwise. When  
securely tightened, close the filter cover.  
15  
 
before calling service/troubleshooting  
You turned the machine on, but the indicator  
light is not lit  
Pump does not drain water  
Check Rinse Hold button has not been  
selected in error. Clean the pump filter. Do not  
attempt to remove the filter if the machine is  
full of water. Check whether the drain hose is  
bent or not. If there is a need to clean the  
pump filter, refer to the pump filter cleaning  
section on page 15.  
Have you plugged in and switched on at  
the socket? Check the power cable, or for a  
blown fuse. Check the front door is properly  
closed.  
After your machine starts operation, if  
Start/Pause/Cancel button starts flashing then  
door is not locked. Open and close the door  
again and press Start/Pause/Cancel button to  
begin washing program again.  
Pre-wash indicator light on the program  
follower is blinking  
Cancel child lock  
Machine does not take in water  
Check the door for proper closure. Either  
tap closed or water inlet filter is clogged.  
Turn the programme selector to the  
programme required.  
If the “wash” led on the program progress  
display and Start/Pause/Cancel button are  
flashing either there is no water or tap is  
off. Check your taps. Press  
Start/Pause/Cancel button. If the problem  
persists unplug your machine, turn off tap  
water and call customer service.  
Water is syphoned / discharged  
Check if the drain hose is positioned as  
described on page 6.  
If the machine vibrates or is too noisy  
Have all the transit bolts and packing been  
removed?  
Is the machine touching something?  
Are all the feet resting firmly on the ground?  
Have the lock nuts been secured?  
Has the recommended wash load been  
exceeded? (See page 13 for max program  
loads)  
Water coming from beneath the machine  
Check the water inlet and drain hoses.  
Tighten the connections. The washers of the  
hoses may be worn out or the pump filter may  
not have been closed properly.  
Foam coming out of the detergent dispenser  
Check whether your detergent is suitable  
for automatic machines. Next time use less  
detergent.  
16  
 
guarantee  
Your new Beko product is guaranteed against  
the cost of breakdown repairs for twelve months  
from the date of the original purchase.  
separately from your retailer).  
Important notes.  
Your Beko product is designed and built for  
domestic household use only.  
What is covered?  
Repairs necessary as a result of faulty  
materials, defective components or  
manufacturing defect.  
The cost of functional replacement parts,  
but excluding consumable items.  
The labour costs of a Beko approved repairer  
to carry out the repair.  
The guarantee will be void if the product is  
instalindicator light or used in commercial  
or non-residential domestic household  
premises.  
The product must be correctly instalindicator  
light, located and operated in accordance  
with the instructions contained in the User  
Instructions Booklet provided.  
Professional installation by a qualified  
Electrical Domestic Appliance Installer is  
recommended for all Washing Machines,  
Dishwashers and Electric Cookers  
Gas Cookers must only be instalindicator  
light by a CORGI (or BORD GAIS) registered  
Gas Installer.  
The guarantee is given only within the  
boundaries of the United Kingdom and the  
Republic of Ireland.  
What is not covered?  
Transit, delivery or accidental damage or  
misuse and abuse.  
Cabinet or appearance parts, including  
knobs, flaps, handles or container lids.  
Accessories or consumable items including  
but not limited to, ice trays, scrapers, cutlery  
baskets, filters and light bulbs.  
Repairs required as a result of unauthorised  
repair or inexpert installation that fails to  
meet the requirements contained in the user  
instruction book.  
Repairs to products used on commercial or  
non-residential household premises.  
Loss of frozen food in freezers or  
fridge/freezers. (Food loss insurance is often  
included within your household contents  
insurance policy, or may be available  
The guarantee is applicable only to new  
products and is not transferable if the  
product is resold.  
Beko disclaims any liability for incidental or  
consequential damages.  
The guarantee does not in anyway diminish  
your statutory or legal rights.  
service  
Please keep your purchase receipt or other  
Republic of Ireland  
All Refrigeration,  
All Cookers  
Washing Machines &  
Dishwashers  
proof of purchase in a safe place; you will need  
to have it should the product require attention  
under guarantee.  
01 862 3411  
You should also complete the details below;  
it will help us assist you when requesting service.  
(The model number is printed on the Instruction  
Booklet and the serial number is printed on  
the Rating Label affixed to the appliance)  
Before requesting service please check the  
trouble-shooting guide in the Operating  
Instructions as a charge may be levied where  
no fault is found even though your product  
may still be under guarantee.  
Service once the manufacturers  
guarantee has expired.  
Model No:  
Serial No:  
If you have purchased an extended  
guarantee please refer to the instructions  
contained within the extended guarantee  
agreement document. Otherwise please call  
the appropriate number above where service  
can be obtained at a charge.  
Retailer:  
Date of purchase:  
For service under guarantee simply telephone  
the appropriate number below  
Should you experience any difficulty in  
obtaining service please contact the Beko  
Customer Help-Line.  
UK Mainland & Northern Ireland  
Fridges & Freezers  
Electric Cookers  
Gas &  
0870 241 0638  
0870 241 1320  
0870 241 1321  
Tel: 0870 774 1050  
Dual Fuel Cookers  
Washing Machines & 0870 241 0357  
Dishwashers  
17  
 
 
Beko plc Beko House, Caxton Way, Watford  
Hertfordshire, WD18 8UF  
Tel: 0870 7741050  
Fax: 08707741090  
 

Bissell Electric Steamer 8920 User Manual
Black Decker Lawn Mower LM175 User Manual
Blanco Indoor Furnishings 515 822 User Manual
BodyCraft Home Gym BCG 446 User Manual
Broil King Gas Grill 9896 84 User Manual
Califone DJ Equipment PA 285 User Manual
Campbell Hausfeld Air Compressor IN633400AV User Manual
Carrier Air Conditioner ZONEKIT4ZCAR User Manual
Casio PDAs Smartphones E 125 User Manual
Celestron Humidifier 21035 User Manual