Blaupunkt MIAMI CD73 User Manual

Radio / CD  
Miami CD72  
Orlando CD72  
Montreal CD73  
US version  
7 642 800 310  
7 642 802 310  
7 643 811 310  
Operating instructions  
4
3
2
1
6
5
12  
11  
10  
9
8
7
3
CONTROLS  
9
AUDIO button, to adjust the  
bass, treble, balance, fader and  
loudness (short press) and oper-  
ate the volume mute feature  
(long press)  
1
Button, to switch the unit on/off,  
adjust the volume  
2
Button, to unlock the remov-  
able control panel (release pan-  
el)  
:
;
Display  
3
4
NEXT button to display the other  
pages in a menu and to switch  
to a different memory bank in ra-  
dio mode  
SOURCE button to start CD  
playback / CD-changer playback  
or Compact Drive MP3 (only if  
connected)  
Softkeys: the function of the soft-  
keys depends on the current dis-  
play content  
or  
To play an external audio source  
(only if connected)  
5
6
DEQ+ button, to open the equal-  
izer menu  
<
TUNER button, to activate radio  
mode and open the radio func-  
tions menu (only possible in ra-  
dio mode)  
button, to open the flip-re-  
lease control panel  
7
8
Joystick  
MENU button, to open the basic  
settings menu  
4
CONTENTS  
Programme type (PTY) .................. 17  
Optimising radio reception............. 18  
Setting the radiotext display ........... 18  
Notes and accessories ............ 6  
Road and traffic safety ..................... 6  
Safety information............................ 6  
Installation ....................................... 6  
Accessories .................................... 6  
CD mode ................................ 19  
Switching to CD mode and  
inserting a CD ............................... 19  
Removing a CD ............................. 19  
Selecting tracks ............................ 19  
Fast searching (audible) ................ 20  
Random track play (MIX) ............... 20  
Repeating tracks (REPEAT) ........... 20  
Displaying CD text......................... 20  
Setting scrolling text ...................... 20  
Removable control panel ......... 7  
Switching on/off ...................... 8  
Adjusting the volume ............... 9  
Sound and volume  
distribution settings ............... 11  
Adjusting the bass ......................... 11  
Adjusting the treble ....................... 11  
X-BASS ........................................ 11 CD changer mode (optional) . 21  
Adjusting the right/left volume  
Switching to CD changer mode..... 21  
Selecting CDs............................... 21  
Selecting tracks ............................ 21  
Fast searching (audible) ................ 21  
Repeating individual tracks or  
whole CDs (REPEAT).................... 22  
Random track play (MIX) ............... 22  
Naming CDs ................................. 22  
distribution (balance) ..................... 11  
Adjusting the front/back volume  
distribution (fader) ......................... 12  
Adjusting the display.............. 12  
Adjusting the viewing angle ........... 12  
Adjusting the display brightness..... 12  
Setting the button illumination  
colour............................................ 13 CLOCK - Time ........................ 24  
Setting the level display ................. 13  
Equalizer ................................ 24  
Radio mode............................ 14  
Preamplifier............................ 28  
Setting the tuner............................ 14  
External audio sources .......... 28  
Specifications ........................ 29  
Switching to radio mode ................ 14  
RDS function................................. 14  
Selecting the waveband /  
memory bank................................. 15  
Tuning into a station....................... 15  
Setting the sensitivity of station  
seek tuning.................................... 16  
Storing stations ............................. 16  
Storing stations automatically  
(Travelstore) .................................. 16  
Listening to stored stations ............ 16  
5
NOTES AND ACCESSORIES  
Installation  
Notes and accessories  
If you want to install your car radio your-  
self, please read the installation and  
connection instructions that follow these  
operating instructions.  
Thank you for deciding to use a Blau-  
punkt product. We hope you enjoy us-  
ing this new piece of equipment.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
Accessories  
Only use accessories approved by Blau-  
punkt.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the equip-  
ment, please contact your dealer or the  
telephone hotline for your country. You  
will find the telephone numbers printed  
at the back of this booklet.  
Remote control  
The RC 08, RC 10 or RC 10H remote  
controls (available as optional accesso-  
ries) allow you to safely and convenient-  
ly access the main functions of your car  
radio.  
Amplifier  
Road and traffic safety  
All Blaupunkt amplifiers can be used.  
Road and traffic safety have ab-  
solute priority. Only operate your car  
radio if the road and traffic conditions  
allow you to do so. Familiarise your-  
self with the device before setting off  
on your journey.  
Calibration microphone  
You can use the calibration microphone  
(available as an accessory) for the  
equalizers automatic sound calibration  
feature.  
You should always be able to hear  
police, fire and ambulance sirens  
from afar. For this reason, set the  
volume of whatever you are listen-  
ing to at a reasonable level.  
CD changer  
The following CD changers can be ob-  
tained from accessory retailers for con-  
nection with this device: CDCA02, CDC  
A 08, CDC A 072 und IDC A 09.  
You can also connect the CDC A 071  
CD-changer by using an adapter cable  
(Blaupunkt no.: 7 607 889 093).  
Safety information  
The car radio and the device's  
control panel (flip-release panel) heat  
up during use. Therefore, when re-  
moving the flip-release panel, only  
hold it by its non-metallic surfaces.  
Allow the car radio to cool down first  
if you want to uninstall the whole unit.  
6
NOTES AND ACCESSORIES  
THEFT PROTECTION  
Removable control panel  
Theft protection  
As a way of protecting your car radio  
against theft, the unit is equipped with  
a removable control panel (flip-release  
panel). Without this control panel, the  
car radio is worthless to a thief.  
Compact Drive MP3  
As an alternative to a CD changer, you  
can connect a Compact Drive MP3 to  
access MP3 music tracks. If you con-  
nect a Compact Drive MP3, you will first  
need to use a computer to store the MP3  
music tracks on the Microdrive(tm) hard  
disk inside the Compact Drive MP3.  
Then, when the Compact Drive MP3 is  
connected to the car radio, you can play  
the tracks like normal CD music tracks.  
The Compact Drive MP3 is operated in  
the same way as a CD changer. Most  
of the CD changer functions can also  
be used with the Compact Drive MP3.  
Protect your equipment against theft by  
taking the control panel with you every  
time you leave your vehicle. Do not  
leave the control panel in your vehicle -  
not even in a hiding place.  
The control panel has been designed  
to be easy to use.  
Note:  
Never drop the control panel.  
Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
Store the control panel in the sup-  
plied case.  
Avoid making direct skin contact  
with the control panels contacts. If  
necessary, clean the contacts with  
a lint-free cloth soaked in alcohol.  
Detaching the control panel  
2
7
THEFT PROTECTION  
SWITCHING ON/OFF  
Press the  
button 2.  
Switching on/off  
The control panel latch mechanism  
opens.  
There are various ways of switching the  
unit on/off.  
First, pull the control panel straight  
off the unit and then out towards  
the left. (For further details, read  
the safety information in the Notes  
and accessorieschapter)!  
Switching on/off using button  
1
To switch the unit on, press button  
1 until you feel the latch open and  
the button pushes out.  
The unit switches on.  
The unit switches off after the con-  
trol panel is removed.  
To switch the unit off, press button  
1 until you feel it click into place.  
All the current settings are saved.  
The unit switches off.  
Any CD already inserted in the unit  
remains there.  
Switching on/off using the  
vehicle ignition  
Attaching the control panel  
If the device is correctly connected to  
the vehicles ignition and the unit was  
not switched off using button 1, it will  
switch on/off simultaneously with the  
ignition.  
Slide the control panel from left to  
right into the units guide.  
Press the left-hand edge of the  
control panel into the unit until it  
clicks into place.  
You can switch the unit on even if the  
ignition is off.  
To do so, press button 1 so that  
you feel it unlatch and push out.  
Note:  
To protect the vehicle battery, the unit  
will switch off automatically after one  
hour if the ignition is off.  
Note:  
When attaching the control panel,  
make sure you do not press the  
display.  
If the device was still switched on when  
you removed the control panel, it will  
automatically switch on again with the  
last settings activated when the panel  
is replaced.  
8
ADJUSTING THE VOLUME  
Activating mute  
Adjusting the volume  
This feature allows you to instanta-  
neously reduce the volume (mute).  
The volume can be adjusted in stages  
from 0 (off) to 50 (maximum).  
Press the AUDIO button 9 for  
To increase the volume, turn the  
longer than two seconds  
volume control 1 to the right.  
MUTEappears in the display.  
To decrease the volume, turn the  
volume control 1 to the left.  
Cancelling mute  
Setting the power-on volume  
You can set the units default power-on  
Briefly press the AUDIO button 9.  
or  
volume.  
turn the volume control 1.  
Press the MENU button 8.  
Telephone audio / navigation  
audio  
Press the softkey 4 assigned to  
the VOLdisplay item.  
If your car radio is connected to a mo-  
bile telephone or a navigation system,  
the units volume will be muted as soon  
as you pick upthe telephone or as  
soon as a navigation announcement is  
made. The caller or voice output will  
then be heard over the car radio loud-  
speakers. In order for this to work, the  
mobile telephone or navigation system  
must be connected to the car radio in  
the manner described in the installation  
instructions.  
Press the softkey 4 assigned to  
the ONdisplay item.  
Set the required volume using the  
volume control 1.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Note:  
To avoid damage to your hearing, the  
power-on volume is limited to a value  
of 40.  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car radio.  
You can set the volume level at which  
telephone calls and the navigation voice  
output will be heard.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the VOLdisplay item.  
9
ADJUSTING THE VOLUME  
Press the softkey 4 that is as-  
signed to the TELdisplay item for  
the telephone volume or NAVI”  
display item for the voice output.  
Automatic sound  
This feature automatically adjusts the  
volume of the car radio to suit the speed  
at which the vehicle is travelling. In or-  
der for this to work, your car radio must  
be connected in the manner described  
in the installation instructions.  
Set the required volume using the  
volume control 1.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The automatic volume boost can be set  
to six levels (0-5). 0means no boost  
and 5means maximum boost.  
The settings are saved.  
Press the MENU button 8.  
Note:  
Press the softkey 4 assigned to  
You can also adjust the volume during  
the telephone call using the volume con-  
trol 1.  
the VOLdisplay item.  
Press the softkey 4 assigned to  
the AUTOdisplay item.  
Set the boost level using the joy-  
stick 7.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Note:  
The optimum setting for the speed-re-  
lated sound adjustment feature de-  
pends on how noise levels develop in  
your particular vehicle. You will need to  
test various settings in order to find out  
which is best suited to your vehicle.  
10  
SOUND AND VOLUME DISTRIBUTION SETTINGS  
X-BASS  
Sound and volume  
distribution settings  
The X-BASS feature can be used to  
aurally compensate the bass at low vol-  
ume levels. The X-BASS boost can be  
set in steps ranging from 0 (off) to 6  
(max). If X-BASS is activated, the con-  
figured X-BASS boost level will be dis-  
play alongside the X-BASS symbol in  
the display.  
Note:  
You can adjust the bass, treble and X-  
BASS individually for each audio  
source.  
Adjusting the bass  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
Press the softkey 4 assigned to  
Press the softkey 4 assigned to  
the BASSdisplay item.  
the X-BASSdisplay item.  
Move the joystick 7 up or right to  
boost the bass or move it down or  
left to reduce the bass.  
Move the joystick 7 up or right to  
boost the X-BASS or move it down  
or left to reduce the X-BASS.  
When you have finished making your  
changes,  
When you have finished making your  
changes,  
press the joystick OK 7 or the  
press the joystick OK 7 or the  
AUDIO button 9.  
AUDIO button 9.  
Adjusting the treble  
Adjusting the right/left volume  
distribution (balance)  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
To adjust the balance, press the  
Press the softkey 4 assigned to  
AUDIO button 9.  
the TREBdisplay item.  
AUDIO 1appears in the display.  
Move the joystick 7 up or right to  
boost the treble or move it down or  
left to reduce the treble.  
Press the softkey 4 assigned to  
the BALdisplay item.  
Move the joystick 7 up/right or  
down/left to adjust the right/left vol-  
ume distribution.  
When you have finished making your  
changes,  
press the joystick OK 7 or the  
When you have finished making your  
changes,  
AUDIO button 9.  
press the joystick OK 7 or the  
AUDIO button 9.  
11  
VOLUME DISTRIBUTION ADJUSTING THE DISPLAY  
Adjusting the front/back volume  
distribution (fader)  
Adjusting the display  
You can adjust the display to suit the  
installation position in your vehicle and  
your own preferences.  
To adjust the fader, press the AU-  
DIO button 9.  
AUDIO 1appears in the display.  
Adjusting the viewing angle  
Press the softkey 4 assigned to  
Press the MENU button 8.  
the FADEdisplay item.  
Press the softkey 4 assigned to  
Move the joystick 7 up/right or  
down/left to adjust the front/back  
volume distribution.  
the DISPdisplay item.  
Press the softkey 4 assigned to  
the ANGLdisplay item.  
When you have finished making your  
changes,  
Move the joystick 7 up/right or  
down/left to adjust the viewing an-  
gle.  
press the joystick OK 7 or the  
AUDIO button 9.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Adjusting the display brightness  
If your car radio has been connected  
as described in the installation instruc-  
tions, the display brightness will switch  
over when the headlights are turned on/  
off. The display brightness can be ad-  
justed separately for night and day in  
steps ranging from 1-6. We recommend  
setting 6.  
Daytime display brightness  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Press the softkey 4 assigned to  
the DAYdisplay item.  
12  
ADJUSTING THE DISPLAY  
Move the joystick 7 up/right or  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
down/left to adjust the brightness.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Setting the level display  
The settings are saved.  
The level display briefly provides a sym-  
bolic display of the volume, the sound  
control settings and the equalizer set-  
tings whilst you are making your chang-  
es.  
Night-time display brightness  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
When you are not changing any set-  
tings, the level display can display the  
car radios output level. You can also  
switch off the level display and have the  
current volume level displayed continu-  
ously.  
Press the softkey 4 assigned to  
the NGHTdisplay item.  
Move the joystick 7 up/right or  
down/left to adjust the brightness.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Switching the level display on/off  
Press the MENU button 8.  
The settings are saved.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Setting the button illumination  
colour  
The colour of the devices button illumi-  
nation can be adjusted (only the soft-  
key colours can be changed on the Mi-  
ami CD72). Choose between COLOR  
1or COLOR 2.  
Keep pressing the softkey 4 as-  
signed to the EQdisplay item un-  
til the required setting EQ DISP  
OFFor EQ DISP ONappears.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Press the MENU button 8.  
The settings are saved.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Keep pressing the softkey 4 as-  
signed to the KEYSdisplay item  
until the required colour (COLOR  
1or COLOR 2) appears in the  
display.  
13  
RADIO MODE  
Radio mode  
The main radio menu for tuning into a  
station is displayed. The radio mode  
functions are controlled in the radio func-  
tions menu. You can open the radio  
functions menu by pressing the TUN-  
ER button < in radio mode again. If  
you are in any other mode, you can  
open the radio functions menu by press-  
ing the MENU button 8 followed by the  
softkey 4 that is assigned to the  
TUNEdisplay item.  
Setting the tuner  
To ensure that the tuner works proper-  
ly, the device must be configured for  
your region. You can choose between  
Europe and the USA. By default, the  
tuner is set to the region in which the  
device was sold. If you experience prob-  
lems with radio reception, please check  
these settings.  
Press the MENU button 8.  
RDS function  
This unit is equipped with an RDS radio  
receiver. Some of the receivable FM  
stations transmit a signal that not only  
carries the programme but also addi-  
tional information such as the station  
name and programme type (PTY). The  
station name appears in the display if  
the radio can received it and the RDS  
function is activated. You can optionally  
display the programme type. For further  
details, please read the section entitled  
Programme type (PTY).  
Press the softkey 4 assigned to  
the SETPdisplay item.  
Press the softkey 4 assigned to  
the AREAdisplay item.  
Press the softkey 4 assigned to  
the display item of the region that  
you require: EUROor USA.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Switching the RDS function on/off  
Switching to radio mode  
To use the RDS function,  
If the device is in CD mode, cassette  
mode, Multi-Media Card (MMC) mode  
(depending on the car radios equip-  
press the TUNER button < in ra-  
dio mode.  
ment) or CD changer/Compact Drive The radio functions menu appears in the  
MP3 mode,  
display.  
press the TUNER button <.  
Press the softkey 4 assigned to  
the RDSdisplay item.  
RDS ONor RDS OFFappears briefly  
in the display.  
14  
RADIO MODE  
To return to the main radio menu,  
Selecting the memory bank  
To switch between the FM memory  
banks (FM1, FM2, FM3 and FMT) or  
AM memory banks (AM1, AM2 and  
AMT),  
press the TUNER button < or the  
joystick OK 7. The settings are  
saved.  
Selecting the waveband /  
memory bank  
select the required FM or AM  
waveband.  
This unit can receive programmes  
broadcast over the FM and AM wave-  
bands. There are four memory banks  
(FM1, FM2, FM3 and FMT) for the FM  
waveband and three memory banks  
(AM1, AM2 andAMT) for theAM wave-  
band. Six stations can be stored in each  
memory bank.  
Repeatedly press the NEXT button  
3 until the required memory bank  
appears in the display.  
The memory banks are accessed in the  
following order: FM1, FM2, FM3, FMT  
or AM1, AM2, AMT.  
Tuning into a station  
There are various ways of tuning into a  
station.  
Selecting the waveband  
To select the FM or AM waveband,  
press the TUNER button < in ra-  
Automatic seek tuning  
dio mode.  
Move the joystick 7 down or up.  
The unit tunes into the next receivable  
station.  
The radio functions menu appears in the  
display.  
Press the softkey 4 assigned to  
Tuning into stations manually  
the BANDdisplay item.  
You can also tune into stations manual-  
ly.  
Press the softkey 4 assigned to  
the FMdisplay item for the FM  
waveband.  
Move the joystick 7 left or right.  
Press the softkey 4 assigned to  
the AMdisplay item for the AM  
waveband.  
Note:  
You can only tune into stations manual-  
ly on the FM waveband if the RDS func-  
tion is deactivated.  
The main radio menu for the selected  
waveband appears.  
15  
RADIO MODE  
Setting the sensitivity of station  
seek tuning  
You can choose whether to only tune  
into stations with a strong reception or  
to also tune into those with a weak re-  
ception.  
Press one of the six softkeys for  
longer than two seconds to store  
the station to that softkey.  
Storing stations automatically  
(Travelstore)  
You can automatically store the six sta-  
tions with the strongest reception in the  
region. The stations are stored in the  
press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the FMT or AMT memory bank.  
display.  
Note:  
Press the NEXT button 3.  
Any stations that were previously stored  
in this memory bank are deleted in the  
process.  
Press the softkey 4 assigned to  
the SENSdisplay item.  
The display shows the currently set sen-  
sitivity level. SENS 6is the highest  
sensitivity setting and means the tuner  
can receive distant stations. SENS 1”  
is the lowest setting.  
Starting the Travelstore function  
press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
Move the joystick 7 up/right or  
Press the softkey 4 assigned to  
down/left to adjust the sensitivity.  
the TSdisplay item.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The station storing procedure begins.  
T-STOREappears in the display. Af-  
ter the process is completed, the sta-  
tion stored in location 1 of the FMT or  
AMT memory bank will be played.  
The settings are saved.  
Storing stations  
Listening to stored stations  
Storing stations manually  
Select the memory bank or wave-  
Select the required memory bank.  
band.  
Tune into the required station as  
described in the section entitled  
Tuning into a station.  
Press the softkey 4 that is as-  
signed to the name or frequency of  
the station that you want to listen  
to.  
16  
RADIO MODE  
Selecting a programme type and  
starting seek tuning  
Programme type (PTY)  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting. Your radio can receive  
and display this information. For exam-  
ple, the programme types can be:  
The PTY menu is made up of several  
pages on which the known programme  
types are displayed. To browse through  
the PTY menus pages,  
repeatedly press the NEXT button  
3 until the required programme  
type appears alongside one of the  
softkeys.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
Press the softkey 4 assigned to  
Using the PTY function, you can direct-  
ly select stations of a particular pro-  
gramme type.  
the required programme type.  
Move the joystick 7 up/right or  
down/left to start seek tuning.  
Activating PTY  
The next receivable station correspond-  
ing to your selected programme type will  
then be tuned into. If no station is found  
that corresponds to the selected pro-  
gramme type, you will hear a beep and  
NO PTYappears briefly in the display.  
The radio will then retune to the station  
that was received last.  
To use the PTY function,  
press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
Press the softkey 4 assigned to  
the PTYdisplay item.  
Note:  
When PTY is activated, the display  
shows the current programme type. The  
programme types are displayed along-  
side the softkeys 4.  
If you want to switch back to the pro-  
gramme types display,  
briefly move the joystick 7 in any  
direction.  
Cancelling PTY  
To cancel the PTY function,  
Whilst the programme types are  
being displayed, press the softkey  
4 assigned to the OFFdisplay  
item.  
17  
RADIO MODE  
Optimising radio reception  
Setting the radiotext display  
Some stations use the RDS signal to  
broadcast scrolling texts known as ra-  
diotexts. You can allow radiotexts to be  
displayed or you can block them.  
Treble reduction feature during  
interference (HICUT)  
The HICUT function improves the sound  
during poor radio reception. If interfer-  
ence occurs, the treble is automatically  
reduced thus reducing the interference  
level.  
press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
Activating HICUT  
Press the NEXT button 3.  
The second pageof the radio func-  
tions menu is displayed.  
press the TUNER button < in ra-  
dio mode.  
The first page of the radio functions  
menu is displayed.  
Press the softkey 4 assigned to  
the RTXTdisplay item.  
Press the NEXT button 3.  
RTXT ONor RTXT OFFappears  
briefly in the display.  
Press the softkey 4 assigned to  
the HCUTdisplay item.  
Press the TUNER button < or the  
joystick OK 7. The settings are  
saved.  
Move the joystick 7 up/right or  
down/left to adjust the HiCut.  
HICUT 0equates to the lowest reduc-  
tion of the interference level, HICUT 3”  
is the highest reduction.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
18  
CD MODE  
You must not hinder or assist the drive  
as it draws in the CD.  
CD mode  
You can use this unit to play standard  
CDs with a diameter of 12 cm.  
The control panel closes automatically.  
The CD menu appears and CD play-  
back begins.  
CD-Rs (CDs that you have burned”  
yourself) and CD-RWs can generally  
also be played. Due to the varying qual-  
ity of CDs, Blaupunkt cannot guaran-  
tee that this will work properly.  
If a CD is already inserted in the  
unit,  
keep pressing the SOURCE button  
To ensure the system functions proper-  
ly, only use CDs labelled with the com-  
pact disc logo. Problems might be ex-  
perienced when trying to play copy-pro-  
tected CDs. Blaupunkt cannot guaran-  
tee the proper functioning of copy-pro-  
tected CDs!  
; until CD mode is displayed.  
The CD menu appears and playback  
begins from the point at which it was  
last interrupted.  
Removing a CD  
press the  
button 6.  
Risk of severe damage to the  
CD drive!  
The control panel opens out towards  
you and the CD is ejected.  
CD singles with a diameter of 8 cm  
and non-circular contoured CDs  
(shape CDs) must not be used.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
Carefully remove the CD.  
Press the  
button 6.  
The control panel closes.  
Selecting tracks  
Move the joystick 7 in one direc-  
tion (up and right for the next track  
or down and left for the previous  
track) until the number of the re-  
quired track appears in the display.  
Switching to CD mode and  
inserting a CD  
If there is no CD inserted in the unit  
yet,  
If you press the joystick 7 downwards  
once or to the left once, the current track  
will be played again from the beginning.  
press the  
button 6.  
The control panel opens out towards  
you.  
Insert the CD with the printed side  
uppermost into the CD compart-  
ment.  
The CD is drawn into the drive.  
19  
CD MODE  
Fast searching (audible)  
Displaying CD text  
To fast search backwards or forwards, Some CDs include CD text. The CD text  
may contain the names of the artist, the  
album and track.  
Press and hold the joystick 7 in  
one direction (up and right for the  
You can allow the CD text to be dis-  
played as scrolling text every time you  
switch to another track. After the whole  
CD text has been shown once, the  
name of the track is displayed. If the  
inserted CD does not contain any CD  
text, NO TEXTwill briefly appear in  
the display if the CD text feature is acti-  
vated.  
next track or down and left for the  
previous track) until fast searching  
backwards/forwards begins.  
Random track play (MIX)  
Press the softkey 4 assigned to  
the MIXdisplay item.  
MIX ONappears briefly in the display.  
The next track to be played will be  
picked at random.  
Activating CD text  
Press the softkey 4 assigned to  
Cancelling MIX  
the TAGdisplay item.  
Press the softkey 4 assigned to  
the MIXdisplay item again.  
Deactivating CD text  
MIX OFFappears briefly in the dis-  
play.  
Press the softkey 4 assigned to  
the TAGdisplay item again.  
Repeating tracks (REPEAT)  
Setting scrolling text  
Press the softkey 4 assigned to  
You can display the contents of the main  
display area as scrolling text.  
the RPTdisplay item.  
REPEATONappears briefly in the dis-  
play. The track is repeated until you  
deactivate RPT.  
Activating CD scrolling text  
Press the softkey 4 assigned to  
the SCRLdisplay item.  
Cancelling REPEAT  
SCROLL ONappears briefly in the  
display.  
Press the softkey 4 assigned to  
the RPTdisplay item again.  
Deactivating CD scrolling text  
REPEAT OFFappears briefly in the  
display. Normal playback is then re-  
sumed.  
Press the softkey 4 assigned to  
the SCRLdisplay item again.  
SCROLL OFFappears briefly in the  
display.  
20  
CD CHANGER MODE  
Selecting CDs  
To move up or down to another CD,  
CD changer mode  
(optional)  
press the softkey 4 assigned to  
the display item of the CD (CD1 –  
CD10) that you require. To do so,  
you might need to switch to the  
second pageof the main CD-  
changer menu using the NEXT but-  
ton 3.  
To find out which CD changers / Com-  
pact Drive can be used with this unit,  
please refer to the "Accessories" chap-  
ter in these instructions or contact your  
Blaupunkt dealer.  
Note:  
Information on handling CDs, inserting  
CDs and operating the CD changer can  
or  
be found in the operating instructions keep pressing the joystick 7 up or  
supplied with your CD changer.  
down until the number of the re-  
quired CD appears in the display.  
Information on using the Compact Drive  
MP3 and recording music tracks onto it  
can be found in the operating instruc-  
tions supplied with the Compact Drive  
MP3.  
Selecting tracks  
To move down or up to another track  
on the current CD,  
repeatedly press the joystick 7 to  
the left or right until the number of  
the required track appears in the  
display.  
Switching to CD changer mode  
Keep pressing the SOURCE but-  
ton ; until CD changer mode is  
displayed.  
If you press the joystick 7 once to the  
left, the current track will be played again  
from the beginning.  
Playback continues from the point at  
which it was last interrupted. If the mag-  
azine was removed from the CD chang-  
er and then replaced, the CD magazine  
Fast searching (audible)  
will first be scanned, and playback will To fast search backwards or forwards,  
begin from the first track on the first CD  
that the CD changer detects.  
press and hold the joystick 7 to  
the left or right until fast searching  
backwards / forwards begins.  
21  
CD CHANGER MODE  
To play the all the tracks on all inserted  
CDs in random order,  
Repeating individual tracks or  
whole CDs (REPEAT)  
press the softkey 4 assigned to  
Press the MENU button 8.  
the MIXdisplay item again.  
Press the softkey 4 assigned to  
MIX ALLappears in the display.  
the CDCdisplay item.  
Note:  
The CD changer functions menu opens.  
In the case of the CDC A 08 and the  
IDC A 09, all the CDs and all the tracks  
in the changer are picked randomly. In  
the case of any other changer, all the  
tracks on one CD are played randomly  
first before the next CD in the changer  
is played.  
Press the softkey 4 assigned to  
the RPTdisplay item.  
RPT TRCKappears briefly in the dis-  
play.  
To repeat the whole CD,  
press the softkey 4 assigned to  
the RPTdisplay item again.  
Cancelling MIX  
RPT CDappears briefly in the display.  
To cancel MIX,  
Cancelling REPEAT  
keep pressing the softkey 4 that  
is assigned to the MIXdisplay  
item until MIX OFFappears brief-  
ly in the display.  
To stop the current track or current CD  
from being repeated,  
keep pressing the softkey 4 that  
is assigned to the RPTdisplay  
item until RPT OFFappears brief-  
ly in the display.  
Naming CDs  
The car radio allows you to assign  
names for up to 99 CDs (not with the  
Compact Drive MP3) so that you can  
recognise them more easily. The names  
can be a maximum of eight characters  
long.  
Random track play (MIX)  
To play the tracks on the current CD in  
random order,  
Press the MENU button 8.  
If you try assigning more than 99 names,  
FULLwill appear in the display.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
Entering / editing CD names  
The CD changer functions menu opens.  
Listen to the CD that you want to  
Press the softkey 4 assigned to  
name.  
the MIXdisplay item.  
Press the MENU button 8.  
MIX CDappears in the display.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
The CD changer functions menu opens.  
22  
CD CHANGER MODE  
Press the softkey 4 assigned to  
Move the joystick 7 to the left or  
the NAMEdisplay item.  
right to change the input position.  
You will now enter edit mode. If your  
chosen CD does not have a name yet,  
eight underscores will appear in the dis-  
play. The current input position flashes.  
Insert an underscore at every input  
position.  
Press the softkey 4 assigned to  
the NAMEdisplay item.  
Move the joystick 7 up or down to  
select the character you want. If  
you want an empty space, simply  
select the underscore.  
The CD name will be deleted.  
Deleting all CD names  
You can delete all the CD names stored  
in the unit.  
Move the joystick 7 to the left or  
right to change the input position.  
To delete all the CD names, press  
the MENU button 8.  
To save a name, press the softkey  
4 assigned to the NAMEdisplay  
item.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
Deleting a CD name  
Press the softkey 4 assigned to  
the CLRdisplay item.  
Listen to the CD whose name you  
CDC CLEARappears in the display.  
The process can take up to 45 seconds  
depending on how many CD names  
have been stored.  
want to delete.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
Note:  
Press the softkey 4 assigned to  
This function is not available for the  
Compact Drive MP3. If you use this  
function with the Compact Drive MP3,  
CDC CLEARis displayed for 45 sec-  
onds. You will not be able operate the  
unit whilst this is happening.  
the NAMEdisplay item.  
You will now enter edit mode. The name  
of the CD appears in the display and  
the current input position flashes.  
Move the joystick 7 up or down to  
select the underscore character.  
23  
CLOCK - TIME  
CLOCK - Time  
Setting the clock  
EQUALIZER  
Equalizer  
This unit is equipped with a digital sound  
calibration feature (DSA Digital Sound  
Adjustment). It provides you with three  
self-calibrating 5-band equalizers and  
five sound presets.  
To set the time, press the MENU  
button 8.  
Press the softkey 4 assigned to  
the VARIdisplay item.  
The EQ1 - EQ3 equalizers can be cali-  
brated automatically with the help of a  
special calibration microphone. You can  
obtain this microphone from your Blau-  
punkt dealer. The automatically ascer-  
tained values can also be adjusted  
manually.  
Press the softkey 4 assigned to  
the CSETdisplay item.  
The CLOCK SETmenu appears.  
Press the softkey 4 assigned to  
the HOURdisplay item.  
Furthermore, you can also set the equal-  
izer manually.  
The hours flash on and off.  
Adjust the hours using the joystick  
The following bands are available:  
7.  
SUB LOW EQ 32 - 50 Hz  
To adjust the minutes,  
LOW EQ  
63 - 250 Hz  
press the softkey 4 assigned to  
MID EQ  
315 - 1,250 Hz  
the MINdisplay item.  
MID/HIGH EQ 1,600 - 6,300 Hz  
HIGH EQ 8,000 - 12,500 Hz  
The minutes flash.  
Adjust the minutes using the joy-  
stick 7.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
24  
EQUALIZER  
Note:  
Switching the equalizer on/off  
To switch the equalizer on/off,  
press the DEQ+ button 5.  
The equalizer menu is displayed.  
The sound radiating from the loud-  
speakers must not be obstructed by any  
objects. All the loudspeakers must be  
connected. The microphone must be  
connected to the unit.  
To activate the equalizer,  
To calibrate an equalizer,  
Press the softkey 4 assigned to  
the USERor PREdisplay item  
and select an equalizer.  
Press the DEQ+ button 5.  
Press the softkey 4 assigned to  
the USERdisplay item.  
To deactivate the equalizer,  
Press the softkey 4 assigned to  
the display item of the equalizer  
that you want to configure.  
Press the softkey 4 assigned to  
the OFFdisplay item.  
Automatically calibrating the  
equalizer  
Press the softkey 4 assigned to  
the AUTOdisplay item.  
You can electronically calibrate and You will hear a test sound, and calibra-  
store values for three different situations. tion takes place.  
EQ 1 for the driver only  
EQ 2 for the driver and front  
passenger  
Proceed as described for all the  
equalizers.  
Selecting an equalizer  
EQ 3 for the front and rear occupants  
After calibration has taken place or you  
have finished making manual adjust-  
ments,  
Hold the calibration microphone (avail-  
able as an accessory) in the appropri-  
ate position whilst the calibration is tak-  
ing place.  
press the DEQ+ button 5.  
The position of the calibration micro-  
phone for situation 1 (e.g. for the driver  
alone) is at the height of the driver's  
head.  
Press the softkey 4 assigned to  
the USERdisplay item.  
Select one of the equalizers EQ1,  
EQ2or EQ3using the corre-  
sponding softkeys 4.  
For situation 2, the calibration micro-  
phone is between the driver and pas-  
senger.  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
For Situation 3, it is in the middle of the  
vehicle interior (left/right, front/back).  
The settings are saved.  
Really quiet surroundings are required  
for the calibration.Any extraneous noise  
will distort the measured values.  
25  
EQUALIZER  
Selecting sound presets  
You can select sound presets for the  
following music types.  
Manually adjusting the equalizer  
Notes on adjusting the settings  
We recommend you use a CD or cas-  
sette (depending on the car radios  
equipment) that you are familiar with for  
making changes to the settings.  
VOCAL (VOCL)  
DISCO (DISC)  
ROCK  
Before adjusting the equalizer, set the  
sound and volume distribution settings  
to zero and deactivate X-BASS. For fur-  
ther details, refer to the chapter entitled  
Sound and volume distribution set-  
tings.  
TECHNO (TECH)  
CLASSIC (CLAS)  
The settings for these music styles have  
already been programmemed.  
Press the DEQ+ button 5.  
Listen to a CD or cassette (de-  
pending on the car radios equip-  
ment).  
Press the softkey 4 assigned to  
the PREdisplay item.  
Select one of the presets using the  
What impression does the sound  
corresponding softkeys 4.  
give you?  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
Now read the Sound impression”  
column in the table entitled Help  
adjusting the equalizer.  
The settings are saved.  
Set the equalizer values as de-  
scribed in the Measurescolumn.  
26  
EQUALIZER  
To select the frequency,  
Making adjustments  
press the joystick 7 to the left or  
Press the DEQ+ button 5.  
right.  
Press the softkey 4 assigned to  
Adjust the level for the frequency  
by pressing the joystick 7 up or  
down.  
the USERdisplay item.  
Press the softkey 4 assigned to  
the display item of the equalizer  
that you want to configure.  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
Press the softkey 4 assigned to  
the display item of the equalizer  
band that you want to configure.  
The settings are saved.  
Help adjusting the equalizer  
Sound Impression / problem  
Measures  
Bass sound is too weak  
Increase bass with  
Frequency: 32 to 160 Hz  
Level: +4 to +6 dB  
Dirty bass  
Booming sound  
Unpleasant pressure  
Reduce the lower mid level with  
Frequency: 400 Hz  
Level: approx. -4 dB  
Sound very much in the foreground,  
aggressive, no stereo effect.  
Reduce the mid level with  
Frequency: 1,000 to 2,500 Hz  
Level: -4 to -6 dB  
Dull sound  
Little clarity  
No brilliance to the instruments  
Increase treble level with  
Frequency: 6,300 to 10,000 Hz  
Level: +2 to +4 dB  
27  
EXTERNAL AUDIO SOURCES  
External audio sources  
PREAMPLIFIER  
Preamplifier  
The car radio provides connections for In addition to the CD changer, you can  
connecting an external preamplifier and also connect another external audio  
a subwoofer.  
source equipped with a line output. The  
audio source can, for example, be a  
portable CD player, MiniDisc player or  
MP3 player.  
We recommend you use well-matched  
products from the Blaupunkt or Veloci-  
ty product ranges.  
The AUX input must be activated in the  
setup menu.  
If you want to connect an external au-  
dio source, you will need an adapter  
cable. You can obtain this cable from a  
Blaupunkt dealer.  
Switching the AUX input on/off  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the SETPdisplay item.  
Press the softkey 4 assigned to  
the AUX1or AUX2display item  
for the input that you want to switch  
on/off.  
The AUX menu is displayed.  
Note:  
If a CD changer is connected, you can-  
not change the AUX1input.  
Press the softkey 4 assigned to  
the ONor OFFdisplay item to  
switch the input on/off.  
Note:  
If theAUX input is switched on it can be  
selected by pressing the SOURCE but-  
ton ;.  
28  
SPECIFICATIONS  
Specifications  
Amplifier  
Output power:  
4 x 26 watts sine  
in accordance  
with DIN 45 324  
at 14.4 V  
4 x 50 watts max.  
power  
Tuner  
Wavebands:  
FM  
AM  
:
:
87.5 107,9 MHz  
530 1 710 kHz  
FM frequency response:  
20 - 16,000 Hz  
CD  
Frequency response:  
15 - 20,000 Hz  
Pre-amp out  
4 channels:  
4 V / 10 k  
AUX input  
Input sensitivity:  
1.2 V / 10 kΩ  
Subject to changes!  
29  
Service numbers / Numéros du service après-vente /  
Números de servicio / Número de serviço  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0030 210 57 85 350 0030 210 57 69 473  
(IRL) 01-4149400  
01-4598830  
02-369 6464  
40 2085  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 023-565 6348  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0441  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
01-333 9575  
Poland  
(PL) 0800-118922  
(TR) 0212-3350677  
(USA) 800-2662528  
Turkey  
USA  
0212-3460040  
708-6817188  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
10/03  
CM/PSS 8 622 403 260  

Blaupunkt ACD 9431 User Manual
Burnham 20_PV_I User Manual
Canon 2691B001 User Manual
Canon PSC 60 User Manual
Coustic 241SE User Manual
Directed Electronics 28871 User Manual
FujiFilm 16209737 User Manual
Havis Shields KR SB 800 User Manual
Hypertec Blue BacPac Campus N13268PHY User Manual
JVC GET0701 001A User Manual